Cart  |  Contact  |  Help  | 
1-888-826-6342  | 
US and Canada1-888-826-6342
International1-203-359-1660

Your One-Stop Source for Process Measurement & Control!

process control loop

 

Process Multimeter Loop Power, 4 to 20 mA Digital Multimeter Output Function | CA450 Series
For details visit omega.com/ir-usb Specifications Measurement Functions: DC voltage, AC voltage, DC current, resistance, frequency, continuity check, diode test; data hold (D*H), ... http://www.omega.com/pptst/CA450.html - 97K - 2/9/2016

Process Controllers with Modular Outputs | CN3000
Pressure Engineering department. The CN3000 series microprocessor-based 1/4 DIN PID controllers provide accurate and reliable control of temperature, pressure and other variables ... http://www.omega.com/pptst/CN3000.html - 134K - 2/9/2016

Loop-Powered Isolators - DIN Rail Input for galvanic isolation | DRSL-LPI_Series
Signal Range (Input to Output): 0 to 20.5 mA Signal Conversion: 1 to 1 Functional Range: 0 to 23 mA (NAMUR NE43 compliant) Start up Current: 10 µA typical Input Overload: 50 mA ... http://www.omega.com/pptst/DRSL-LPI_SERIES.html - 107K - 2/11/2016

Loop Powered and Four-Wire Ultrasonic Level Transmitters | LVU1501 Series
Description The LVU1500 series has been discontinued. Please contact our Flow Engineering department for a possible substitute. The LVU1500-LP Series Two-Wire ("Four-Wire" for four ... http://www.omega.com/pptst/LVU1501.html - 91K - 2/9/2016

Process Controller - CN78000 Series - OMEGA® | CN78000 Series
Four security levels are password protected. For optimal PID control, the on/off, P, PI or PID manual-tune control functions can be selected, or the controller will autotune ... http://www.omega.com/pptst/CN78000.html - 173K - 2/13/2016

Loop Powered Displacement Transmitters with Excitation for AC LVDT's, Works with LD200 and LD300 Series...
Range of Gain Control: 3.5 to 1 switched, 5 to 1 adjustable Range of Zero Control: Up to 100% on max gain Output Current: 4 to 20 mA 2-wire or 0 to 20 mA 3-wire Output Impedance: ... http://www.omega.com/pptst/LDX-2.html - 96K - 2/9/2016

Passive Loop Powered Isolator | DR910
The DR910 obtains power from the input signal. The modules are snapped onto symmetrical DIN rails in accordance with EN 50 022. When using the DR910, ensure that the ... http://www.omega.com/pptst/DR910.html - 99K - 2/9/2016

| TX33
Description The TX33 model has been discontinued. Please see the TX92G Series as a possible alternative or contact our Temperature Engineering Department. The TX33 is an analog, ... http://www.omega.com/pptst/TX33.html - 82K - 2/5/2016

Two-wire, Current Loop Process Indicator | TX82B
Class I, II, III, Division 1, Groups A,B,C,D,E,F,G. The FM certification number is 2P1A7.AX (3610:2010) Built for Industrial Environments Model TX82B is housed in a splash ... http://www.omega.com/pptst/TX82B.html - 117K - 2/9/2016

Digital Closed Loop Motor Controller | OMDC-ASP10 Digital Closed Loop Controller
The OMDC-ASP10 is simple to operate... just set the desired RPM, rate, or time in the large ½" LED display by depressing the "up-down" pushbuttons, one digit at a time or fast ... http://www.omega.com/pptst/OMDC-ASP10.html - 111K - 2/8/2016




< Previous topic: process control language