Cart  |  Contact  |  Help  | 
US and Canada1-888-826-6342

Your One-Stop Source for Process Measurement & Control!

strain gage amplifiers

Wide selection of strain gage amplifiers

DC to DC Isolated Signal Conditioner STRAIN GAGE AMPLIFIER | DMD4380 Series
Vdc loop supply for the output. The power supplies can also be wired to sink or source which allows the DMD4380 to be used with any combination of powered or unpowered mA inputs ... - 91K - 6/28/2016

Bridge/Strain Gage Signal Conditioner | DMD4059 Series
Input Range (unipolar): Minimum: 0 to 5 mV range, 0.5 mV/V sensitivity Maximum: 0 to 400 mV range, 40 mV/V sensitivity Input Impedance: 200 kΩ typical Excitation Voltage: Switch ... - 91K - 6/28/2016

Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers | DMD-465
Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers DMD-465 bvseo_sdk, net_sdk, CLOUD, getAggregateRating, 265ms REVIEWS, PRODUCT bvseo-msg: ... - 121K - 6/28/2016

2-Channel Strain-Gage Expansion Card for Use with OMB-DAQBOARD-2000 Series or OMB-LOGBOOK | OMB-DBK16
Series data acquisition systems. The OMB-DBK16 is a general-purpose card that accommodates the connection of most strain-gage types, from single-element quarter-bridges to ... - 84K - 6/28/2016

OM2 Series Modular Signal Conditioning System for Strain Gage Bridges, mV and other Sensor Signals |...
All connections are easily made with a screwdriver. The backplane is available with a 115 Vac, 230 Vac or 10-36 Vdc power supply. The backplane and signal conditioner assembly make ... - 123K - 6/28/2016

Summing Box/Transmitter, 4-20 mA and 0-10 Vdc Outputs | JBOX4800
Tare Adjustment: (Three Ranges) -3 to 6.5 mV, 6.5 to 16 mV, 16 to 25 mV Common Mode Rejection Ratio:100 db Common Mode Input Voltage: 5 Vdc Test Output Signal: adds 8 mA or 4 V to ... - 85K - 6/28/2016

DIN Rail Mount Bridge Input Signal Conditioners | DRC-4710 and DRC-4720
Compliance Voltage (DRC-4720): 5.5V max Loop Resistance (DRC-4720): 250 Ω max Frequency Response (2-Pole Filter): DC to 10 Hz Total RMS Gain Temperature Coefficient: 0.007%/°C ... - 104K - 6/28/2016

Economical Hot Plate Blackbody Calibration Source | BB-2A
Target Size: 152 mm (6") dia. Emissivity: 0.95 Power:115 Vac, 50/60 Hz Display: Dial Indicating Thermometer Control: Potentiometer Power Controller Dimensions: 165 W x 127 H x 184 ... - 92K - 6/28/2016

instruNet Series Direct Sensor to Data Acquisition | iNET-100
...Point Optional LabVIEW Drivers are available. USB, RS232, RS485 and Ethernet Data Acquisition Systems - View related products Order Table Description Specs Manuals Related Products ... - 224K - 6/28/2016

NEMA 4X Washdown Enclosure, Slope Top Electrical Panel, Stainless Steel Chemical Resistant Sloping Top...
Enclosure, Chemical Resistant Electrical Enclosures, sizes 60x48 to 72x72" SCE-2DST Series Stainless Steel Enclosures bvseo_sdk, net_sdk, CLOUD, getAggregateRating, 109ms ... - 156K - 6/27/2016

< Previous topic: strain gage amplifier