 |
||
 |
|
 |
 |
 |
|||
 |
 | |||
|
||||
|
|||||||||||||||
|
|||||||||||||||
| |
|
This page is from a previous version of the Omega.com site, information and pricing may be invalid. For TUBING, go to our current TUBING product listing. For tube FITTINGS, go to the current Tube FITTING product listing. |
|
|
|
Santoprene thermoplastic rubber
tubing is offered with Shore A hardness of 55A (TYSP5), 64A (TYSP6),
and 73A (TYSP7). The tubing resists fatigue and exposure to ozone and
ultraviolet radiation. |
|
SPECIFICATIONS |
|||
|
|
TYSP5 |
TYSP6 |
TYSP7 |
|
Hardness, Shore A |
55A |
64A |
73A |
|
Specific Gravity |
0.97 |
0.97 |
0.97 |
|
Tensile Strength, PSI |
640 |
950 |
1,100 |
|
Elongation at Break, % |
330 |
400 |
410 |
|
Heat Distortion Temp. |
275°F |
275°F |
275°F |
|
Low Temp. Flexibility |
Below 60°C |
||
|
1/16"to 3/4" ID TUBING |
||||
|
Regular Tubing |
FDA Approved Tubing |
Dimensions |
||
|
Model No. |
Model No. |
ID, in x OD, in |
Wall, in |
|
|
TYSP(*)-316116-50 |
TYSP(*)F-316116-50 |
1/16 |
3/16 |
1/16 |
|
TYSP(*)-1418-50 |
TYSP(*)F-1418-50 |
1/8 |
1/4 |
1/16 |
|
TYSP(*)-3818-50 |
TYSP(*)F-3818-50 |
1/8 |
3/8 |
1/8 |
|
TYSP(*)-516316-50 |
TYSP(*)F-516316-50 |
3/16 |
5/16 |
1/16 |
|
TYSP(*)-38316-50 |
TYSP(*)F-38316-50 |
3/16 |
3/8 |
3/32 |
|
TYSP(*)-916316-50 |
TYSP(*)F-916316-50 |
3/16 |
9/16 |
3/16 |
|
TYSP(*)-3814-50 |
TYSP(*)F-3814-50 |
1/4 |
3/8 |
1/16 |
|
TYSP(*)-71614-50 |
TYSP(*)F-71614-50 |
1/4 |
7/16 |
3/32 |
|
TYSP(*)-1214-50 |
TYSP(*)F-1214-50 |
1/4 |
1/2 |
1/8 |
|
TYSP(*)-5814-50 |
TYSP(*)F-5814-50 |
1/4 |
5/8 |
3/16 |
|
TYSP(*)-716516-50 |
TYSP(*)F-716516-50 |
5/16 |
7/16 |
1/16 |
|
TYSP(*)-12316-50 |
TYSP(*)F-12516-50 |
3/16 |
1/2 |
3/32 |
|
TYSP(*)-18116-50 |
TYSP(*)F-1316516-50 |
1/16 |
1/8 |
1/4 |
|
TYSP(*)-1238-50 |
TYSP(*)F-1238-50 |
3/8 |
1/2 |
1/16 |
|
TYSP(*)-91638-50 |
TYSP(*)F-91638-50 |
3/8 |
9/16 |
3/32 |
|
TYSP(*)-5838-50 |
TYSP(*)F-5838-50 |
3/8 |
5/8 |
1/8 |
|
TYSP(*)-138-50 |
TYSP(*)F-138-50 |
3/8 |
1 |
5/16 |
|
TYSP(*)-916716-50 |
TYSP(*)F-916716-50 |
7/16 |
9/16 |
1/16 |
|
TYSP(*)-5812-50 |
TYSP(*)F-5812-50 |
1/2 |
5/8 |
1/16 |
|
TYSP(*)-111612-50 |
TYSP(*)F-111612-50 |
1/2 |
11/16 |
3/32 |
|
TYSP(*)-3412-50 |
TYSP(*)F-3412-50 |
1/2 |
3/4 |
1/8 |
|
TYSP(*)-7858-50 |
TYSP(*)F-7858-50 |
5/8 |
7/8 |
1/8 |
|
TYSP(*)-134-50 |
TYSP(*)F-134-50 |
3/4 |
1 |
1/8 |
| * Specify durometer: 5 (for 55A), 6 (for
64A), or 7 (for 73A). Ordering Example: TYSP5-38316-50 specifies a 50' spool, 55A diameter, 3/16" ID x 3/8" OD, 3/32 wall, $18. FKM is a registered trademark of DuPont Dow Elastomers |
 |
|
  |
|||
 |
||||