Microstepping Motor Drives |
| 3540M |
|
 |
|
|
|
|
|
$
275.00
3540M
|
| • |
DC Bus Voltage 12 to 42 Vdc Motor Supply (Including Ripple)
|
| • |
Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
|
| • |
Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
|
| • |
Enable Input to Turn Off Current to the Motor
|
| • |
Screw Terminal Connectors
|
| • |
MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
|
| • |
3 State, Pulse Width Modulated Current Control, Switching at 20 to 30 KHz
|
View related products - Drives & Motors
|
| |
|
|
|
 |
The 3540M/MO step motor drivers are
microstepping drives with up to 12,800
steps per revolution, step phase sequencer
with MOSFET three state switching
amplifiers and optoisolated circuits. Both
drives include 5 optically isolated inputs, and
the 3540MO features external speed control,
tach output, and internal pots for accel/decel
rate along with high/low speed range
selection.
The 3540M drive is a step and direction drive,
and includes an automatic feature
(switch selectable) to lower motor current by 50%
anytime the motor is left at rest for more
than one second. Additionally there is a
switch-selectable self-test which rotates the
motor 1/2 revolution in each direction at
100 steps/second. This drive is compatible with PLCs which feature
high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible.
For operation with +24V signals, a 3600-ohm series resistor is required on each input.
See the drive manual for details.
The 3540MO drive has an on-board oscillator
which allows the motor speed to be controlled
by an analog voltage or external joystick.
This drive is ideal for continuous motion applications
such as mixers and blenders. A tach output is also available on this drive.
Motor current for both drives is selected from 32 levels by a
DIP switch. Microstepping resolution is
selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is
fixed at 12,800 steps/revolution.
Learn more about stepper motors and drives:
Introduction to Stepper Motors and Drives
Click here for more info on the ELC series PLC:
ELC-PLC Series
Click here for more info on the OCS XL series PLC:
OCS XL Series
Power Supply (Required for Drive Operation): Recommended:
OMPS150A24
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example: (1) 3540M Microstepping step motor drive, $275, plus (1) OMHT23-597 NEMA 23 stepper motor, 177oz-in holding torque, $68, plus (1) OMPS150A24 Stepper drive power supply, 24 VDC, 6.3A, $180, $275 + 68 + 180 = $523.00
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Manual, Related Products
|
|
|
|
|
|
 |
|
|
|
Product Manual
|
|
Download
3540M - Step Motor Driver
|
|
Download
3540MO Series - Step Motor Driver
|
|
Related Products
|
|
 |
PS Series:
|
|
Power Supplies for Open Frame Stepper Drives
|
|
|
|
 |
1240i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
2035:
|
|
Stepper Motor Drive
|
|
|
|
 |
3540i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
Si3540:
|
|
Programmable Stepper Drive with Integrated Power Supply
|
|
|
|
 |
ST Series:
|
|
Performance Stepper Drives With Advanced Features And Control Options
|
|
|
|
 |
STAC6 Series:
|
|
High Performance Stepper Drives with Integrated Power Supply
|
|
|
|
|
|
|
 |
|
|
Keywords.:Microstepping Motor Drives, microstep, bipolar drive, chopper drive, PWM amplifier, optoisolated inputs, optically isolated, idle current reduction, oscillator, analog speed control, tach output, step and direction, enable, self test
|
Back to top
|
|
