The DP6070 temperature
meter boasts specifications and
functionality that clearly makes
it one of the most advanced
temperature meters available.
It’s dual-line 6-character display,
function keys, and optional
expansion modules are only a few
of the special features available.
The DP6070 accepts many
thermocouple types and RTDs and
can be configured to have either
a 1° or 0.1° display resolution
on any type of sensor input. The
lower display makes configuration
simpler. The display itself is quite
configurable. There are many
relay functions for up to 8 relays;
including an Interlock Relay
function. The 4 to 20 mA output
can represent up to 12 different
parameters/variables. This makes
the DP6070 one of the most
versatile meters on the market.
Sunlight readable display models
have an extraordinarily bright
LED display. The upper display
can be programmed to indicate
current temperature, maximum or
minimum temperature, alternating
maximum/minimum temperatures,
one of eight alarm set points, or
Modbus input. The lower display
can also be configured to display
engineering units, set points,
user defined legends, or simply
turned off. Input selection and
configuration are conveniently
set up via rear switches and
front panel programming. Three
levels of password protection
help maintain the reliability of the
programming.
General Specifications Display: Both displays are 6 digits (-99999 to 999999), red LEDs with leading zero blanking Upper Display: 15 mm (0.60") high Lower Display: 12 mm (0.46") high Display Intensity: 8 intensity levels Display Update Rate: 5/second (200 ms) Overrange: Display flashes 999999 Underrange: Display flashes -99999 Display Assignment: The upper and lower displays may be assigned to PV1, PV2, PCT (percent), max/min, alternate max and min, set points, units (lower display only), or Modbus input Front Panel: NEMA 4X (IP65) Programming Methods: 4 front panel buttons, digital inputs, PC and software, Modbus registers, or cloning using copy function Noise Filter: Programmable from 2 to 199 (0 will disable filter) Filter Bypass: Programmable from 0.1 to 99.9% of calibrated span Recalibration: Calibrated at the factory. Recalibration is recommended at least every 12 months Max/Min Display: Max (peak)/min (valley) readings reached by the process are stored until reset by the user or until power to the meter is cycled Password: 3 programmable passwords restrict modification of programmed settings; Pass 1: Allows use of function keys and digital inputs; Pass 2: Allows use of function keys, digital inputs and editing set/reset points; Pass 3: Restricts all programming, function keys, and digital inputs Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost Power Options: 85 to 265 Vac 50/60 Hz, 90 to 265 Vdc, 20 W maximum, or jumper selectable 12/24 Vdc ±10%, 15 W max Fuse (External, Required):UL recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse,br>
Isolated Transmitter Power Supply: 24 Vdc ±5% @ 200 mA maximum (standard), (12/24 Vdc powered models rated @ 100 mA maximum); 5 or 10 Vdc @ 50 mA maximum, selectable with internal jumper J4 Normal Mode Rejection: Greater than 60 dB at 50/60 Hz Isolation: 4 kV input/output-to-power line; 500V input-to-output or output-to-P+ supply Overvoltage Category: Installation overvoltage category II, local level with smaller transient overvoltages than installation overvoltage category III Operating Temperature Range: -40 to 65°C (-40 to 149°F) Storage Temperature Range: -40 to 85°C (-40 to 185°F) Relative Humidity: 0 to 90% non-condensing Connections: Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adaptors Enclosure: 1/8 DIN, high impact plastic, UL 94V-0, color: black Mounting: 1/8 DIN panel cutout required: 92 x 45 mm (3.622 x 1.772"); two panel mounting bracket assemblies are provided Tightening Torque: Screw terminal connectors: 5 lb-in (0.56 Nm) Overall Dimensions: 119 W x 62 H x 143 mm D (4.68 x 2.45 x 5.64") Weight: 269 g (9.5 oz)
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with 2 side mounting brackets and operator’s manual. Ordering Example: (1) DP6070-6R0 Temperature panel meter, $299.00
