The DPF5100 microprocessor-based, 6-digit, 1 /8 DIN panel instrument can be configured by front-panel keys or by a personal computer as a frequency meter/ tachometer, frequency-ratio meter, period/ period-average meter, time-interval/ time-interval-average meter, reset stopwatch, and cumulative timer or totalizer/1-stage batch controller. However, the DPF5100 display cannot toggle between rate and total. Two signal inputs can be used to provide frequency ratio or time-interval measurements. Five Operating Modes In the frequency meter, the minimum display update rate is equal to 1 period of the frequency input. Thus, very low frequency measurements are displayed and updated faster than most conventional frequency meters. Only two sensors are required to measure the rate of a moving object. The DPF5100 can be set up as frequency-ratio meter, ideal for monitoring flow ratios. The DPF5100 can be set up as an up or down totalizer/1-stage batch controller at rates up to 7 MHz. The display capacity is –99,999 to 999,999 counts with exponential format up to 9.99 E9. Upon ac power loss, the latest reading is automatically saved in non-volatile RAM and is restored upon return of power.
† All dollar amounts on this site are shown in US currency.
Note:
*Options (-A, -BCD, and -R) are mutually exclusive. Ordering Example: (1) DPF5100-A meter with analog output, $380 + 155, $535.00
Part Number Builder
Option Descriptions
(1)
Multi-Function Meter
Select DPF5100 for Meter for 2 TTL/CMOS Inputs DPF5200 for Same as DPF5100 with Sensor Excitation for 1 channel DPF5300 for Meter with Conditioner for One Low Level and one TTL/CMOS Input DPF5400 for Meter with Conditioner for 2 Channels DPF5500 for Meter for Analog mA and Voltage Inputs (1 channel)
(2)
Power & Display Options
Select Nothing(leave field blank) for Standard Unit -A for Analog Output -BCD for BCD Output -R for 6A Dual Relays -10/32VDC for 10 to 32 Vdc Power -230AC for 230 Vac Power
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
