Thermocouple Terminal Blocks with Audit Capable Female Connector |
| DRTB Series Thermocouple Terminal Blocks |
|
 |
|
|
|
|
|
$
9.50
DRTB-K
|
| • |
Screw Type Terminal for Secure and Maintenance Free Connections
|
| • |
Type K, J, T, E, N, R/S and U Calibrations
|
| • |
Built in Miniature Female Thermocouple Connector for Auditing and Troubleshooting
|
| • |
Fully Enclosed - No End Plates Required
|
| • |
DIN Rail Mountable - Narrow 10.7 mm Width
|
| • |
Identified with Calibration and "+, -" Connections
|
| • |
Write-On Window Included
|
View related products - Wire Connection
|
| |
|
|
|
 |
| Troubleshooting and Datalogging
has never been easier,
DRTB-K terminal blocks shown with the
HH506RA hand
held datalogger/thermometer |
Audit your temperature signals anytime, anywhere without interrupting the signal.
The new DRTB Series thermocouple terminal blocks are manufactured with
thermocouple alloys to guarantee accurate readings. A built-in SMPW
compatible female receptacle accepts a miniature thermocouple connector.
The female connector allows the user to connect to a handheld meter for
applications such as data collection, quality assurance compliance, capability
studies and troubleshooting installation or repairs.
The plastic housing is made from gray polyamide 6.6 thermoplastic resin with
a UL 94 V0 rating for 85°C. These thermocouple terminal blocks are
fully enclosed and require no end plates. The screws and clamps are zinc
plated, and together they provide an excellent vibration, maintenance free and
corrosion resistant connection.
DRTB terminal blocks mount on standard 35 mm DIN rails or 32 mm G-type
rails, and are identified with calibration type and positive (+) and negative (-)
connections. Wire entry is funneled to allow quick wire insertion even with
stranded wire.
See related links below for compatible SMPW male connectors
SPECIFICATIONS
Terminal Width: 10.7 mm (0.422 in)
Terminal Length/Height: 51 mm (2.008 in)/42.3 mm (1.666 in)
Installed Height to 35 x 7.5 mm/35 x 15 mm DIN Rail: 43.5 mm (1.713 in)/51 mm (2.009 in)
Maximum Wire Size: 12 AWG/2.5 mm²
Stripping Length: 8 mm (0.31 in)
Torque in Nm (in-lb): 0.6 to 0.8 (5.3 to 7.1)
Temperature Rating: -40 to 85°C (-40 to 185°F)
Easy access enclosures to house DRTB thermocouple terminal blocks - allow access for auditing without exposure to power circuits. EK series with flip up door or TG style with quarter turn screws. Terminal blocks not included with enclosures, see accessories in ordering table.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) RECK1-10 Type K, 0.3 m (1') retractable extension cable, $18.50, plus (1) DRTB-K thermocouple terminal block, type K, $9.50, $18.50 + 9.50 = $28.00
(5) DRTB-J type J thermocouple terminal block, $9.50 ea., plus (1) HH506RA Dual input, high accuracy datalogger with RS232C interface, $199.00, plus (1) RECJ4-10 Type J, 1.2m (4') retractable extention cable with 2 SMP miniature connectors, $33.50, $9.50 X 5 + 199.00 + 33.50 = $280.00
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
 |
SMPW and HMPW :
|
|
Miniature Thermocouple Connectors Flat Pin with Write-on Window, Standard and Extended Temperature Range
|
|
|
|
|
|
|
|
|
|
|
 |
TJ36 Series:
|
|
Rugged Heavy Duty Transition Joint Thermocouple Probes
|
|
|
|
|
 |
Enclosures Product Finder:
|
|
New Enclosure Product Finder - It's the easiest way to sort through our selection of Enclosures to find the right product for your application
|
|
|
|
 |
SCE Series 9 Operator Consoles:
|
|
NEMA Type 12 Single Door Operator Workstations - Electrical Cabinets for Industrial Operator Interface to Mount Push Buttons and HMI's.
|
|
|
|
 |
Thermocouple Product Finder:
|
|
It's the easiest way to sort through our selection of thermocouples to find the right product for your application
|
|
|
|
|
|
|
 |
|
|
