
	Part Number All Omega search item

Insertion Paddlewheel Flow Sensors

FP-6500

Insertion Paddlewheel Flow Sensors

Click for larger image.

•	Available in 316 Stainless Steel or Brass
•	Installs in a Wide Range of Pipe Sizes From 2" to 48"
•	Excellent Low-Flow Performance
•	Special Fittings Not Required
View related products - Turbine and Paddle Wheel Flowmeters

Compatible Meters:

DPF700
DPF70
DPF10
DPF11
FC-21, 22

Related links below.

Ruby bearings and a non-drag pick-off give these adjustable insertion flow sensors the widest flow range of any of the paddlewheel types. A Hall-effect device detects the passage of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent hundreds of feet without a transmitter, over unshield cable. This signal can be connected directly to many PCLs and other controls without additional electronics.

Installation fittings are standard 1½" or 2" NPT. A depth adjustment system allows two basic sizes to cover pipe sizes from 5.08 to 25 cm (2 to 48").

SPECIFICATIONS
Materials
    Probe Body: Brass or Type 316 SS
    Rotor: Polypropylene
    Shaft: Tungsten Carbide
    Bearings: Ruby ring, ruby end stone, set in PVDF bearing holder
    Power: 5 to 24 Vdc, 1.5 mA
Signal: Square wave, 11 Hz/fps (approx.), current sinking output, 20 mA maximum, NPN (Hall Effect)
Cable: #22 AWG 3-conductor, 6 m (18') standard; 650 m (2000') max
Accuracy: ±1.5% of full range
Range: 0.3 to 30 fps
Maximum Working Pressure: 13.8 bar (200 psi) at 24°C (75°F)
Maximum Temperature: 93°C (200°F) at 0 psig
Shipping Weight:
    FP6501: 1.8 kg (4 lb)
    FP6502: 2.3 kg (5 lb)
Pipe Size Range:
    FP6501: 5.08 to 25 cm (2 to 10")
    FP6502: 25 to 122 cm (10 to 48")
Fitting Size: 1½ MNPT

To Order (Specify Model Number)

Part Number	Availability	Price	Description	RoHS	Qty.

FP6501-SS	1 Week	$624.00	316SS sensor 2 -10", 1½" NPT		qty.
FP6502		$584.00	Brass sensor 10 - 48", 1½" NPT		qty.
FP6502-P		$497.00	PVC sensor 10 - 48", 2" NPT		qty.
FP6502-SS		$657.00	316SS sensor 10- 48", 2" NPT		qty.

Accessories

FP-15827-K		$103.00	Repair kit (bearing assembly & rotor), Kynar		qty.

† All dollar amounts on this site are shown in US currency.

Note: Comes complete with operator’s manual. Note: Pull-up resistor may be required 2 to 10 kohm.
Ordering Example: (1) FP6501 Brass sensor 3 -10", 1½" NPT, (1) DPF701 1/8 DIN Panel Meter for Rate Indication or Totalization = $758.00

Related Links - Related Products

Related Products

	DPF700 Series:
	1/8 DIN Six Digit Rate Meter/Totalizer

	DPF75:
	Ratemeters, Totalizers and Batch Controllers for Frequency Inputs

	FC-21 and FC-22:
	Multifunction Flow Computers

Keywords.:Insertion Paddlewheel Flow Sensors