Insertion Paddlewheel Flow Sensors |
| FP7001A |
|
 |
|
|
|
|
|
The OMEGA® FP7001A paddlewheel
flow and temperature sensor is ideal
for accurate monitoring of typical
industrial water flows, hard-tohandle
corrosive aqueous solutions,
and high purity fluids (see “Wetted
Materials” for details). The FP7001A
utilizes a paddlewheel-like rotor
whose motion is converted into a
high-level square wave pulse output
by an open collector Hall effect
sensor. Pulse amplitudes from 5 to
18 V are possible, depending on
input power. The FPW-15 120 Vac
converter plugs directly into a wall
socket and outputs a regulated
15 Vdc at 400 mA.
The DPF700 Series panel meter
supplies power for the flow sensor
and provides rate indication, or
totalization and batch control
(when ordered with the dual relay
option). When ordered with the
analog output option, the DPF700
can be used to interface the FP7001A
flow signal to such items as strip
chart recorders, dataloggers, and
computer interfaces.
The system consists of the flow
sensor, an installing fitting, and the
electronics. The PVC tee fittings are
supplied with a PVC locking nut,
and the galvanized iron tee fittings
are supplied with a brass locking
nut to provide secure metal-to-metal
mounting to the threaded brass
insert.
The FP7001A is not compatible with
FP-5300 or FMG-5300 Series
installation fittings. When powered
by the FPW-5 five Vdc wall socket
converter, the FP7001A has a TTL
level pulse output which can be
used with a variety of pulse input
flow indicators, signal conditioners
and controllers. It is not compatible
with the FPM 5500/5740.
Specifications
Accuracy: ±2% of full scale
Repeatability: ±1% of full scale
Power: 5 to 18 Vdc @ 10 mA maximum
Wetted Materials: FP7000 Series sensor: polypropylene body, PVDF paddle,FKM O-ring, 316SS shaft.
Galvanized iron tee includes brass insert and locking nut. PVC tee has PVC insert and locking nut.
Fluid Temperature/Pressure Range:
Do not exceed the maximum ratings of your piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by your
piping and not by the sensor. For all PVC tee fittings, do not exceed 150 PSIG @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) 30 psig @ 60°C
(140°F), due to the insert in the tee. FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max. pressure decreases 1.1 psig per each .56°C (1°F) above 27°C (80°F)
for a max. temperature of 93°C (200°F) at 18 psig max.
Frequency Output: Nominal 1 Hz/fps. amplitude of open collector pulse = Vdc input power
Cable Length: 2.4 m (8 feet)
Weight: FP7001: 0.2 kg ( 1 /2 lb) FP7030GI: 2.8 kg (6 1 /4 lb) FP7030: 4.3 kg (9 1 /2 lb)
Max Viscosity: 5 cps
Temperature Sensor Specifications
Range: 2 to 150°C (36 to 302°F)
Accuracy: ±1°C
Output: 10 mV/°C
Power: 5 to 18 Vdc
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with operator's manual.
Ordering Example: (1) FP7001A paddlwheel sensor with temperature sensor, (1) FP7007 3/4" PVC fitting, (1) DPF701-A 1/8 DIN Panel Meter for Rate or Totalization with 4 to 20 mA output, (1) DPI8 Display for temperature sensor = $877.00
|
|
|
|
|
| |
 |
|
|
|
|
 |
 |
 |
|
|
Related Links -
Manual, Related Products
|
|
|
|
|
|
 |
|
|
|
Product Manual
|
|
Download
FP7001 Series - Paddlewheel Flowsensors
|
|
Download
DPF700
|
|
Download
DPF75,DPF76&DPF77
|
|
Related Products
|
|
|
|
 |
CNi8 Series:
|
|
i-Series 1/8 DIN Programmable Temperature/Process Controllers with RS-232 & RS-485 Communications.
|
|
|
|
|
|
|
 |
|
|
Keywords.:Insertion Paddlewheel Flow Sensors
|
Back to top
|
|
