
	Part Number All Omega search item

Variable Speed and Fixed Peristaltic Pumps

FPU2000, FPUVS2000, FPUDV2000

Variable Speed and Fixed Peristaltic Pumps

Click for larger image.

^$ 912.00 FPUDVS2003

•	Peristaltic Pump Tube Does Not Require Valves
•	Self Priming
•	High Outlet Pressure Capability of 100 psig on Most Models
•	Acceptable for Indoor Use
•	Corrosion Proof Valox Housing
•	Tamper Resistant Electronic Control Panel Cover
•	Tube Failure Detection
View related products - Pumps

The FPU2000 Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000 Series have fixed speed outputs and can be adjusted by selecting the pumphead tube size and choosing the desired RPM (revolutions per minute).

The FPUVS2000 and FPUDVS2000 Series variable speed pumps are for continuous pumping pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.

The FPUDVS2000 Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA and 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) and digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000 Series.

A liquid tight connector is supplied and should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.

SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30') water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6¹⁄8 x 10¹⁄8 x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6¼ x 10 x 9¼")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (³⁄8" ID x ¼" OD)

To Order (Specify Model Number)

Part Number	Availability	Price	Description	RoHS	Qty.


Peristaltic Pumps


Fixed Timer Control

FPU2001		$468.00	Max Feed Rate: 6 ml/min (2.3 GPD)		qty.
FPU2002	3 Weeks	$457.00	Max Feed Rate: 13 ml/min (4.9 GPD)		qty.
FPU2003	3 Weeks	$457.00	Max Feed Rate: 21 ml/min (8 GPD)		qty.
FPU2004	3 Weeks	$457.00	Max Feed Rate: 25 ml/min (9.5 GPD)		qty.
FPU2005	3 Weeks	$468.00	Max Feed Rate: 28 ml/min (6.8 GPD)		qty.
FPU2006		$457.00	Max Feed Rate: 42 ml/min (16 GPD)		qty.
FPU2007	3 Weeks	$457.00	Max Feed Rate: 63 ml/min (24 GPD)		qty.
FPU2008	3 Weeks	$457.00	Max Feed Rate: 79 ml/min (30.1 GPD)		qty.
FPU2009	3 Weeks	$468.00	Max Feed Rate: 57 ml/min (21.7 GPD)		qty.
FPU2010		$457.00	Max Feed Rate: 138 ml/min (52.5 GPD)		qty.
FPU2011	3 Weeks	$457.00	Max Feed Rate: 200 ml/min (76.1 GPD)		qty.
FPU2012	3 Weeks	$457.00	Max Feed Rate: 250 ml/min (95.1 GPD)		qty.

Variable Speed - Standard Percentage

FPUVS2001	3 Weeks	$630.00	Max Feed Rate: 6 ml/min (2.3 GPD)		qty.
FPUVS2002	3 Weeks	$619.00	Max Feed Rate: 13 ml/min (4.9 GPD)		qty.
FPUVS2003		$619.00	Max Feed Rate: 21 ml/min (8 GPD)		qty.
FPUVS2004	3 Weeks	$619.00	Max Feed Rate: 25 ml/min (9.5 GPD)		qty.
FPUVS2005	3 Weeks	$630.00	Max Feed Rate: 28 ml/min (6.8 GPD)		qty.
FPUVS2006	3 Weeks	$619.00	Max Feed Rate: 42 ml/min (16 GPD)		qty.
FPUVS2007		$619.00	Max Feed Rate: 63 ml/min (24 GPD)		qty.
FPUVS2008	3 Weeks	$619.00	Max Feed Rate: 79 ml/min (30.1 GPD)		qty.
FPUVS2009		$630.00	Max Feed Rate: 57 ml/min (21.7 GPD)		qty.
FPUVS2010	3 Weeks	$619.00	Max Feed Rate: 138 ml/min (52.5 GPD)		qty.
FPUVS2011	3 Weeks	$619.00	Max Feed Rate: 200 ml/min (76.1 GPD)		qty.
FPUVS2012		$619.00	Max Feed Rate: 250 ml/min (95.1 GPD)		qty.

Variable Speed - Digital Percentage Controllers

FPUDVS2001		$923.00	Max Feed Rate: 6 ml/min (2.3 GPD)		qty.
FPUDVS2002		$912.00	Max Feed Rate: 13 ml/min (4.9 GPD)		qty.
FPUDVS2003		$912.00	Max Feed Rate: 21 ml/min (8 GPD)		qty.
FPUDVS2004		$912.00	Max Feed Rate: 25 ml/min (9.5 GPD)		qty.
FPUDVS2005		$923.00	Max Feed Rate: 28 ml/min (6.8 GPD)		qty.
FPUDVS2006	3 Weeks	$912.00	Max Feed Rate: 42 ml/min (16 GPD)		qty.
FPUDVS2007		$912.00	Max Feed Rate: 63 ml/min (24 GPD)		qty.
FPUDVS2008	3 Weeks	$912.00	Max Feed Rate: 79 ml/min (30.1 GPD)		qty.
FPUDVS2009	3 Weeks	$923.00	Max Feed Rate: 57 ml/min (21.7 GPD)		qty.
FPUDVS2010	3 Weeks	$912.00	Max Feed Rate: 138 ml/min (52.5 GPD)		qty.
FPUDVS2011	3 Weeks	$912.00	Max Feed Rate: 200 ml/min (76.1 GPD)		qty.
FPUDVS2012	3 Weeks	$912.00	Max Feed Rate: 250 ml/min (95.1 GPD)		qty.

Accessories

FPU1000-AB	3 Weeks	$26.00	Quantity 2, armature bearings		qty.
FPU1000-IF		$32.00	Injection fitting		qty.
FPU2000-14PTA	3 Weeks	$25.00	1/4" OD pump tube assembly		qty.
FPU2000-38PTA	3 Weeks	$25.00	3/8" OD pump tube assembly		qty.
FPU2000-716PTA	3 Weeks	$28.00	7/16" OD pump tube assembly		qty.
FPU2000-CW	3 Weeks	$5.00	Ceramic weight		qty.
FPU2000-PH	3 Weeks	$55.00	Pump head		qty.
FPU2000-PHB	3 Weeks	$19.00	Pump head cover with bearing		qty.
FPU2000-RA	3 Weeks	$57.00	Roller assemblies for 1/4 and 3/8" tube models		qty.
FPU2000-716RA	3 Weeks	$57.00	Roller assemblies for the 7/16" tube model		qty.
FPU2000-SP	3 Weeks	$3.00	Strainer plug		qty.
FPU2000-TN	3 Weeks	$3.00	Tube nut (3/8")		qty.

† All dollar amounts on this site are shown in US currency.

Note: Comes complete with suction tube strainer, tube weight, suction tubing, discharge tubing and injection fitting with internal back-flow check valve, mounting hardware, and operator’s manual. FPUVS and FPUDVS come with an additional set of brushes.
To order 220 Vac/50Hz model add “-220/50” to model number, no additional charge. To order 230 Vac/60 Hz model add “-230/60” to model number, no additional charge.
Note: 220 Vac/50Hz fixed speed models output approximately 20% less.
Ordering Example: (1) FPUDVS2008 Digital Peristaltic Pump = $912.00

Keywords.:Variable Speed and Fixed Peristaltic Pumps