Big Flexible Display |
| G3 BFD Series |
|
 |
|
|
|
|
|
$
6,000.00
G3BFDM00
|
| • |
Large 977.9 x 482.6 mm (19 x 38.5") Red Led Display with 0.2" Diameter Pixels; 128 x 64 Dot Resolution
|
| • |
Displays The Information from Any G3 To The Plant Floor
|
| • |
Connects Directly To The RS485 Port of a G3
|
| • |
Field Replaceable Display Boards
|
| • |
Replaceable Fan Filter
|
| • |
Flexible 4 Eyebolt Mounting
|
| • |
Universal AC Power (100 to 240 Vac, 50/60 Hz)
|
| • |
Optional NEMA 4 Cooling Kit Available
|
View related products - Process Measurement and Control Instruments
|
| |
|
|
|
 |
The BFD is a large 977.9 x 482.6 mm
(38.5 x 19") LED display (128 x 64 pixel
resolution) which is driven from the
RS485 port of a G3. The BFD is built using
32 display boards in an 8 column by 4 row configuration. When used with a G303, the
BFD will display the contents of the current
G3 page. When used with larger G3s, the
desired information is selected by using a
"display primitive" on the current G3 page.
Multiple BFDs can be driven from a single G3
(see Using Multiple BFDs with a single G3).
The exact number is dependent upon the
lengths of the individual wiring runs.
The display is housed in a welded
steel enclosure and the display window
(0.118" thick red acrylic) is sealed to the
enclosure using a gasket and bezel strips.
The gasketed rear panel is bolted to the
enclosure. The ventilation slots and internal
fan are designed to provide adequate cooling
in a normal industrial environment. The enclosure is designed to hang from an
overhead support. The BFD enclosure can
be easily converted for indoor NEMA 4
operation using the optional BFD NEMA 4
conversion kit. The kit includes a sealed
cover plate (to plug the vent hole), an
external "cabinet cooler" (to replace the
internal fan) and a DIN-rail mounted power
supply to operate the "cabinet cooler".
Power to the BFD is provided by a universal
AC input power supply. The AC power and
the G3 RS485 cable enter the enclosure
through separate conduit fittings. AC
power connects to the power supply via a
removable 3 position terminal block. The
RS485 signal connects to the communication
board via either an RJ45 modular plug or
a removable 2 position terminal block.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with mounting kit and operator’s manual.
Ordering Example: (1) G3BFDM00 Big flexible display, $6,000.00
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
 |
G3 CBL Series:
|
|
Cables for use with the G3 HMIs, DSP series, and CSMSTR series
|
|
|
|
|
 |
G306 Series:
|
|
5.7" Web Enabled Operator Interface Color LCD
|
|
|
|
 |
G308 Series:
|
|
8" Web Enabled Graphic LCD Operator Interface Terminal
|
|
|
|
 |
G310 Series:
|
|
10" and 15" Web-Enabled Graphic LCD Operator Interface Terminals
|
|
|
|
 |
G3 DSP Series:
|
|
Communication Gateway for PLC's, PC's and SCADA Systems. High-Speed Data Logging , Web Server and Virtual HMI.
|
|
|
|
|
|
|
 |
|
