SiNET™ Multi-Axis Motion Control |
| HUB 444 |
|
 |
|
|
|
|
|
$
320.00
HUB 444 DIN RAIL
|
| • |
Networks All Applied Motion Stepper or Servo Si™ Products for Multi-Axis Motion Applications
|
| • |
For Real-Time Execution of Commands Downloaded from a Host PC or PLC Using the Si Command Language™ (SCL)
|
| • |
Programmable for Stand-Alone Single or Multi-Axis Operations with Easy-to-Use SiNet Hub Programmer™ Windows Software (Software and Programming Cable Included)
|
| • |
Can Also Act as a Router, Allowing a Host Computer or PLC to Control 1 to 4 Drives and the On-Board I/O Using Si Command Language™ (SCL)
|
| • |
Communication via RS232
|
| • |
4 Optically Isolated Programmable Inputs, 5 to 24 Vdc
|
| • |
4 Optically Isolated Programmable Outputs, 24 Vdc, 100 mA
|
| • |
Hub Programs and Host Computers Also Have Access to the I/O in Each Drive, Typically 8 Inputs and 3 Outputs per Drive
|
| • |
Screw Terminal Connectors Make I/O Wiring Easy
|
| • |
RJ11 "Telephone-Style" Connectors for Drives and PC for Easy, Reliable Connections
|
| • |
Powered by Drive #1, No External Power Supply Required
|
| • |
Can Control and Power Optional MMI (Operator Terminal)
|
| • |
Optional DIN Rail Mounting Kit Makes Installation Easy
|
| • |
Sample Motion Programs Available by Request
|
View related products - Drives & Motors
|
| |
|
|
|
 |
The SiNet™ Hub 444 allows up to 4 Stepper
or Servo Si™ drives to be controlled in host
mode from a single PC or PLC’s RS232
serial port or will run in stand-alone mode.
Each indexer-drive acquires its unique address
from the port to which it is connected. This simple addressing scheme
minimizes the cost of the drives, and more
importantly, the cost of configuring and/or
replacing drives in your system. Connections
are made with low cost, reliable RJ11 cabling.
Any of our popular, cost effective
programmable Stepper or Servo Si™ drives or
Si™ motor controls can be used with the
SiNet™ Hub 444. By choosing the power level
and features you need for each axis
of your application, SiNet™ can provide a
cost effective single or multi-axis motion
solution. The SiNet™ Hub 444 is powered by
the drive that’s connected to port #1, saving
you the cost and installation expense of
using a separate power supply. Our
Si Command Language™ (SCL) allows a
host PC or PLC to execute relative, absolute
and homing moves, make status inquiries,
sample inputs, set outputs, and more.
If your application requires a single axis to
operate in "host mode", you can connect any
of our programmable Si™ drives directly to
your PC via the SiNet™ Hub 444 and invoke
the Si Command Language™ (SCL). Our SiNet
Programmer™ Windows software allows the
user to create and store multi-axis motion
control programs in the SiNet™ Hub 444
and run them without a PC, thus allowing
the user to create a complex multi-axis
motion system controlled from an operator
interface or trigger.
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Software and drive cables are included.
Ordering Example: (1) HUB 444 DIN RAIL Multi-axis network hub with DIN rail mounting kit, $320
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
 |
PS Series:
|
|
Power Supplies for Open Frame Stepper Drives
|
|
|
|
 |
STM Series:
|
|
Integrated Stepper Drives/Motors with Advanced Features and Control Options
|
|
|
|
 |
1240i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
3540i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
ST Series:
|
|
Performance Stepper Drives With Advanced Features And Control Options
|
|
|
|
 |
Si3540:
|
|
Programmable Stepper Drive with Integrated Power Supply
|
|
|
|
 |
STAC6 Series:
|
|
High Performance Stepper Drives with Integrated Power Supply
|
|
|
|
|
|
|
|
 |
|
|
Keywords.:multi-axis motion control, multi-axis hub, stepper motor, step motor, stepper drive, circular interpolation, motion network, drive network, drive hub, motion control, programmable, stand-alone operation, real-time command execution
|
Back to top
|
|
