OMEGA’s LC900 Series bolt force sensor is a compression load cell designed to measure the clamping force of a bolt. With excellent long term stability and all stainless steel construction, the LC900 Series delivers high reliability in severe industrial environments. This unit is designed to operate by mounting on a flat surface between two mounting washers (included).
The LC901 is also available in metric configurations, with ranges from 0-10,000 to 0-500,000 N.
Please see the LCM901 for complete details, or contact our Pressure department for more information.
SPECIFICATIONS Excitation: 5 Vdc (10V max) Output: 2 mV/V nominal Accuracy: ±3.5% FSO (linearity, hysteresis and repeatability combined) Zero Balance: ±4% FSO Operating Temp Range: -54 to 93°C (-65 to 200°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Zero: ±0.018% FSO/°C Span: ±0.036% rdg/°C Safe Overload: 130% of capacity Ultimate Overload: 150% of capacity Bridge Resistance: 120 Ω nominal Construction: Stainless steel Electrical Connection: 1.2 m (4') insulated shielded cable
† All dollar amounts on this site are shown in US currency.
Note: 1) LC911 mating connectors, part number PT06F10-6S sold separately. 2) All LC900 Series include a NIST traceable calibration certificate. Ordering Example: (1) LC911-1/2-30K 30,000 lb sensor for 1/2" bolt with connector on cable, $355.00, plus (1) PT06F10-6S mating connector sold separately, $26.50, $355.00 + 26.50 = $381.50