Operator Interface |
| MMI-01 |
|
 |
|
|
|
|
|
$
518.00
MMI-01
|
| • |
Ideal Operator Interface for Si Programmable Drives
|
| • |
Connects Directly to Si-Programmable Drives Using the Standard Programming Cable – No Special Wiring Required
|
| • |
Power is Supplied by the Drive – No Additional Power Supply Required
|
| • |
Easy to Program Using Si™ Programmer Software
|
| • |
4-Line, 20 Characters/Line LCD Display
|
| • |
20-Key Keypad
|
| • |
Can be Surface Mounted or Flush Mounted [NEMA 4/12 (IP56/52) Rating for Flush Mounting Only]
|
| • |
Sample Motion Programs Available by Request
|
View related products - Drives & Motors
|
| |
|
|
|
 |
The MMI-01 is an easy-to-use, flexible
device that allows an operator to enter move
speeds, move distances or repeat loop
counts. Messages can also be displayed and
the program can be paused until the user
presses a key, such as ENTER, YES or NO.
Program branching can be accomplished
based on the response of YES or NO. The
MMI-01 is compact, easy to install and
carries a NEMA 4/12 (IP56/52) rating
(the 4 x 20 character display and 20-key
membrane keypad are sealed). Connection
to any of our "Si" or "i" indexer drives is
accomplished by the standard programming
cable that is supplied with every drive. This
cable also supplies power to the MMI-01 so
that no additional power supply or wiring is
needed. Set-up and programming of the
MMI-01 is fast and easy. Our programmable
"Si" or "i" drives are furnished with Si™
Programmer software, which allows the user
to easily program instructions for the terminal. Complex,
confusing items like baud
rate, parity and cursor
positioning are handled
automatically by the
software. On-screen
emulation of the MMI-01
by the Si™ Programmer
software allows a
potential user to try the
MMI before purchasing one.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) MMI-01 Operator Interface, $518.00
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
 |
HUB 444:
|
|
SiNET™ Multi-Axis Motion Control
|
|
|
|
 |
ST Series:
|
|
High Performance Stepper Drives With Advanced Features And Control Options
|
|
|
|
 |
1240i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
3540i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
Si3540:
|
|
Programmable Stepper Drive with Integrated Power Supply
|
|
|
|
 |
STAC6 Series:
|
|
High Performance Stepper Drives with Integrated Power Supply
|
|
|
|
|
|
|
|
|
 |
|
