Modem Based 4 to 20 mA Data Logger
Discontinued Product |
| OM-CP-PHONEPROCESS |
|
 |
|
|
|
|
|
|
| • |
Programmable Engineering Units, Scale Factor and Offset Value
|
| • |
Built-in Modem
|
| • |
User Calibration Through Software
|
| • |
Real Time Operation
|
| • |
16-Bit Resolution
|
|
|
| |
|
|
|
|
The OM-CP-PHONEPROCESS is no longer available. Please contact our Data Acquisition department
for possible substitutes.
The OM-CP-PHONEPROCESS is a modem based low cost, high resolution, battery powered, stand-alone data logger used for automatically recording current between -20 and 120 mA. The OM-CP-PHONEPROCESS uses a 16-bit ADC to achieve a resolution of 0.01 mA. In addition, the OM-CP-PHONEPROCESS allows the user to store user defined units into the device as well as scale factors and offset values. This enables the user to easily linearize and scale any process meter that provides an analog output to process units automatically. This all-in- one compact, portable, easy to use device will measure and record up to 32,768 current measurements. The OM-CP-PHONEPROCESS is a major leap forward in both size and performance. Its real time clock ensures that all data is time and date stamped. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. Its small size allows it to fit almost anywhere. Data retrieval is simple. The device has a built in modem and may be easily accessed and is fully programmable from any PC using our software. Simply enter the phone number that the OM-CP-PHONEPROCESS is connected to and our software will automatically do the rest. The software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can be exported to a text or Microsoft Excel file.
For complete product specifications see the Related Links section at the bottom of this page.
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Operator's manual, battery and RS-232 cable are included with the OM-CP-IFC110 Windows software (software is required to operate the datalogger and is sold separately). .
Ordering Example: (1) OM-CP-IFC110 Windows software and 1.2 m (4') RS-232 cable with DB9F termination = $99.00
|
|
|
|
|
| |
 |
|
|
|
|
 |
 |
 |
|
|
Related Links -
Manual
|
|
|
|
|
|
 |
|
|
|
Product Manual
|
|
Download
OM-CP Series - Data Logger and Software User Guide
|
|
Download
OM-CP Series - Data Logger Quickstart Guide
|
|
|
|
 |
|
|
Back to top
|
|
