Humidity, Temperature, Pressure and Tri-Axial Shock Data Logger
Part of the NOMAD® Family |
| OM-CP-ULTRASHOCK101 |
|
 |
|
|
|
|
|
|
| • |
Built-In Accelerometers
|
| • |
All Inclusive Design
|
| • |
Compact
|
| • |
Programmable Start Time
|
| • |
Real-Time Operation
|
| • |
Reusable
|
| • |
User Friendly
|
View related products - Recorders
|
| |
|
|
|
|
The OM-CP-ULTRASHOCK
is a battery powered, stand alone
temperature, pressure, humidity
and 3-axis shock recorder.
The OM-CP-ULTRASHOCK
measures and records temperature,
pressure and humidity at the
selected reading rates, while
shock is recorded as the peak
acceleration levels over the same
interval.
The OM-CP-ULTRASHOCK
is specifically designed for
documenting dynamic environments
such as moving vehicles, trucks,
containers, ships, etc. The device
is also valuable in characterizing
environments such as production
and assembly lines of delicate
electronics, IC fabrication,
communications and computer
components.
This compact, portable, easy to use
device will measure and record up
to 174,762 measurements per
channel. The storage medium is
non-volatile solid state memory,
providing maximum data security
even if the battery becomes
discharged. The device can be
started and stopped directly from
your computer and it’s small size
allows it to fit almost anywhere.
The OM-CP-ULTRASHOCK
makes data retrieval quick
and easy. Simply plug it into an
empty COM or USB port and our
user-friendly software does the rest.
Specifications
TEMPERATURE
Sensor: Semiconductor
Range: -20 to 60°C (-4 to 140°F)
Resolution: 0.1°C
Accuracy: +0.5°C (0 to 50°C)
HUMIDITY
Sensor: Capacitive Polymer
Range: 5 to 95% RH
Accuracy: +3% RH (+2% RH typical at 25°C)
Resolution: 0.1% RH
Specified Accuracy Range: 10 to 40°C; (10 to 80% RH)
PRESSURE
Sensor: Semiconductor strain gage
Calibrated Accuracy: +1.0% FSR 25°C; + 0.2% typical
Resolution: 0.002 psia
Range: 0 to 30 psia
SHOCK
Acceleration Type: MEMS Semiconductor
Sampling Rate: 1.953 millisecond (512 Hz)
Acceleration Frequency Response: 0 Hz to approximately 400 Hz
Readings: 64 readings every
second to 1 every 5 minutes
Recording Interval: 64 Hz to 5 minutes for shock, selectable in
software. Temperature, pressure and humidity sampled approximately
every 2 seconds at intervals shorter than 2 seconds. Otherwise, sampled
at the reading rate.
Memory: 174,762 readings per channel (1,572,858 readings total)
Start Mode: Immediate start or delay start, up to 6 months
in advance
Real-Time Recording: Device can be used with PC
to monitor and record data in real-time
Pasword Protection: An optional
password may be programmed into the device to restrict access to
configuration options. Data may be read out with the password
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device
Power: 9V lithium or alkaline (battery included)
Data Format: Date and time stamped; °C, °F, °K, °R, %RH,
mg/ml water vapor concentration, psia, inHg, mm Hg, bar, atm, torr,
Pa, kPa, MPa, g
Time Accuracy: ±1 min per month at 2 to 30°C
Battery Life: 3 to 7 days typical with lithium battery, 1 min
reading rate @ 25°C
Computer Interface: PC or USB (interface cable
required); 115,200 baud
Software:
WIN98/NT/2000/XP/VISTA 32-bit
(VISTA 32-bit version only;
VISTA 64-bit is not supported)
Operating Environment:
-20 to 60°C (-4 to 140°F) 0 to 95% RH non-condensing
Dimensions:
89 H x 111 W x 26 mm D
(3.5 x 4.4 x 1.0")
Weight: 341 g (12 oz)
Material: Anodized aluminum
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Operator's manual and RS-232 cable are included with the OM-CP-IFC110 Windows software (Software is required to operate the datalogger and is sold separately).
|
|
|
|
|
| |
 |
|
|
|
|
 |
 |
 |
|
|
Related Links -
Manual
|
|
|
|
|
|
 |
|
|
|
Product Manual
|
|
Download
OM-CP Series - Data Logger and Software User Guide
|
|
Download
OM-CP Series - Data Logger Quickstart Guide
|
|
|
|
 |
|
|
Keywords.:Humidity, Temperature, Pressure and Tri-Axial Shock Data Logger
Part of the NOMAD® Family
|
Back to top
|
|
