OMEGAPHONE® Monitor Up to Eight Dry Contact or Low Voltage Inputs and Power |
| OMA-VM500-6-LV and OMA-VM500-6-HV |
|
 |
|
|
|
|
|
Model OMA-VM500-6-LV monitors up to eight switch closures (dry
contacts) or 24 Vac/Vdc inputs. This dialer allow you to program a
"normal" state and a time delay for each input. A five-second message
can be recorded to define each input. An additional local
identification message can be recorded to identify the dialer.
When an input is different from the programmed "normal" state for
longer than the time delay, the unit will dial up to four phone or pager
numbers. The integrated voice tells you which zone is in alarm and the
current status. You can call the unit at any time to hear a status report
including power status. All programming is accomplished over
the phone following simple voice instructions.
When the dialer goes into an emergency state it will energize the
alarm relay, activate the alarm buzzer and begin making
emergency calls. When the unit dials a voice number it will first play
the local identification message and the current status of any inputs
which caused the emergency state. The unit ceases to be in the
emergency state once contact is made with the unit.
When the dialer is in alarm condition, it will dial all programmed
phone number until contact is made. If contact has not been made after
dialing all phone numbers, the dialer will wait 20 minutes and then begin
calling again. This sequence is repeated until contact is made.
When the dialer calls a voice phone number, it will play the local
identification message and the current state of any input that
caused an alarm and power status. The dialer will then prompt the user
to enter the PIN. When the correct PIN is entered, contact has been
made and the dialer will stop calling. If the dialer calls an answering
machine or voice mail, the dialer will leave the warning message and will
continue to call. When the dialer calls a pager number, it will transmit
the programmed local ID number, any inputs which have caused an
alarm and the line voltage (power) status.
Contact is made when the user enters the four digit PIN number,
or if the user is on site by pressing the cancel button located on the
front of the dialer. If the input(s) return to the programmed "normal"
states, the unit will also cease to be in the emergency state.
Specifications
Number of Inputs: 8
Input Type: OMA-VM500-6-LV:
dry contact (NO or NC), 24 Vac
60 Hz
(acceptable range
17 to 48 Vac), or 24 Vdc
(acceptable range 6 to 48 Vdc)
The input types are switch selectable
between dry contact and powered.
Telephone: standard RJ11 phone
jack connection
Telephone Numbers: stores up to
four phone numbers
up to 20 digits
long
Personal Identification Message:
record up to a 5-second message
that identifies the dialer
Individual Channel Identification
Messages:
record up to a 5-second
identification message for each
input
Operation: operates with answering
machine on the same phone line
Alarm Notification: alarm buzzer
sounds and alarm relay
closes
if any input(s) go into an alert
condition
Alarm Cancellation: pushbutton
on front of the unit silences
the
alarm and cancels emergency
telephone calls
Alarm Relay Output:
5A, 125 Vac
Alarm Relay Operation:
energized during an emergency
state;
optional control via touch
tone phone (model OMA-VM500-6R)
Power:
powered from included
120 Vac wall
mount transformer power supply
Battery Backup:
4-hour rechargeable battery
backup;
20 or 30 hours optional
Operating Ambient:
0 to 52°C (32 to 125°F)
Electrical Connections:
plug-in terminal block
Dimensions:
117 H x 223 W x 57 mm D
(4.62 x 8.79 x 2.26")
Material:
ABS plastic
Weight: 0.9 kg (2 lb)
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: OMEGACARE SM extended warranty program is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE SM covers parts, labor and equivalent loaners.
Each unit is supplied with complete user’s manual.
|
|
|
|
|
| |
 |
|
|
|
|
 |
 |
 |
|
|
Related Links -
Manual
|
|
|
|
|
|
 |
|
|
|
Product Manual
|
|
Download
OMA-VM500-6-LV - Alarm Dialer - Low Volt - ADDENDUM
|
|
Download
OMA-VM500-6-HV - Alarm Dialer - High Volt - ADDENDUM
|
|
|
|
 |
|
|
Back to top
|
|
