The PHH-103A model has been discontinued. Please see the
PHH103B as a possible alternative or contact our Flow Engineering department.
The PHH-103A is a portable, microprocessor-based
temperature meter. Its rugged, splashproof housing makes
it ideal for field applications. On its large, 2-line LCD, the
PHH-103A can display pH/mV and temperature readings
simultaneously. Up to 5 buffer values can be stored in
memory, allowing for fast, accurate calibration. Calibration
(1-point, 2-point, etc.) is user adjustable. The display will
indicate the percentage of slope (“PTS”) to show the status
of the electrode after slope calibration. The PHH-103A also
features a low-battery indicator and will automatically shut
off after 10 minutes of non-use.
Easy mounting is accomplished with the large magnet on
the back of the meter or by mounting hole on top of the meter.
A suction cup mounting hook is supplied with the meter.
0 to 14
32 to 212
0 to 100
Temp Compensation: ATC, 0 to 100°C (32 to 212°F) or MTC Calibration: pH 4, 7, 10 pH Connection: BNC connector, 100 mm (4.0") long probe, epoxy body, 1 m (3') long cable Temperature Sensor: Pt 100 Ω Power: 9 V battery (included); low-battery indicator Dimensions: 108 H x 75 W x 30 mm D (4.3 x 2.9 x 1.2") pH/mV Display: 20 mm (0.8") high Weight: 135 g (0.3 lb) with battery
† All dollar amounts on this site are shown in US currency.
Note: Comes with hard carrying case, rubber boot, pH/temperature electrode, small suction cup electrode holder, 4 pH and 7 pH buffer solutions, suction cup mounting hook, and 9 V battery and complete operator’s manual.