
	Part Number All Omega search item

Chemical Metering Pumps Microprocessor-Based, High Performance

PHP-200 Series

PHP-200 Series:Chemical Metering Pumps Microprocessor-Based, High Performance

Click for larger image.

•	Continuous Stroke Length Adjustment Measured
•	Direct Calibration and Built-In Warning
•	Adjustable Back-Pressure Control
•	Totalized Output in U.S. Gallons or Liters
•	Bleed Valve Standard
•	Control Options: Manual or Analog
•	Relay Output Option
•	Available In Polypropylene, PTFE or Stainless Steel Liquid Ends
View related products - Pumps

The PHP-200B Series is a diaphragm-type, solenoid driven microprocessor based metering pump with maximum capacities to 4.5 gph and maximum back pressures to 253 psig. The housing is constructed of fiberglass-reinforced PPE plastic, with a NEMA 4X (IP65) enclosure rating to protect against corrosion, dust and water. A removable hood covers the faceplate. The drive unit houses a short-stroke solenoid with a maximum stroke length of 1.25 mm (0.05"). It is equipped with a noise suppressing mechanism for quiet operation and has only one moving part, the armature. The diaphragm is constructed of fabric-reinforced EPDM elastomer with a plastic core and PTFE facing. It is chemically resistant against virtually all process fluids and can be used over a wide temperature range. Suction and discharge ports are equipped with double ball check valves for maximum repeatability. Feed rate is determined by stroke length and stroke rate. Stroke length is manually adjustable from 1 to 100% in increments of 1% via the stroke length knob. Two control modes are available for the PHP-200B Series: manual or analog control.

The PHP-210B Series incorporates all the features of the PHP-200B and also accepts a current input signal. This allows the stroking rate to be controlled by standard process signals. Multiple functions can be programmed through the front keypad, including step-up or stepdown ratios and the predetermining counter mode which allows a pre-set number of strokes to be counted.

SPECIFICATIONS
    Maximum Stroke Length: 1.25 mm (0.05")
    Materials of Construction:
    Housing: Fiberglass-reinforced PPE
    Diaphragm: PTFE-faced EPDM with plastic core
Liquid-End Options: Polypropylene (P), PTFE (T), 316 SS (S)
Seal: FKM for P models, PTFE for T and S models
Enclosure Rating: NEMA 4X (IP66)
Power Supply: 100 to 230 Vac, 1 phase, 50/60 Hz ±10%
Repeatability of Metering: ±2% under constant conditions and at minimum 30% stroke length
Ambient Temperature Range: -10 to 45°C (14 to 113°F) Max Fluid Operating Temperature: 50°C (122°F)
Power Cord: 2 m (6')

To Order (Specify Model Number, see variations below in part number builder table)

Part Number	Availability	Price	Description	RoHS	Qty.


Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.


Pulse Frequency Input Models

PHP-201A-P		$845.00	pH pump, 145 psi, Polypropylene		qty.
PHP-202A-P		$789.00	pH pump, 232 psi		qty.
PHP-203A-T		$1,385.00	pH pump, 174 psi, 0.45 GPH, PTFE		qty.
PHP-205A-P		$895.00	pH pump, 145 psi		qty.
PHP-206A-T		$1,490.00	pH pump, 43.5 psi, 0.45 GPH, PTFE		qty.
PHP-206B-P		$1,150.00	pH pump, 101 psi, 2.9 GPH, Polypropylene		qty.
PHP-207A-P		$895.00	pH pump, 21 psi		qty.

Pulse Frequency/Current Input Models

PHP-211B-P		$925.00	pH pump, 145 psi, 0.19 GPH, Polypropylene		qty.
PHP-212A-T		$1,686.00	pH pump, 232 psi, PTFE		qty.
PHP-213A-T		$1,725.00	pH pump, 174 psi, 0.45 GPH, PTFE		qty.
PHP-214A-P		$1,034.00	pH pump, 116 psi, 0.90 GPH, Polypropylene		qty.
PHP-215A-S		$2,251.00	pH pump, 145 psi, Stainless Steel		qty.
PHP-215B-P		$1,200.00	pH pump, 253 psi, 1.10 GPH, Polypropylene		qty.
PHP-216A-P		$1,065.00	pH pump, 43.5 psi, 2.2 GPH, Polypropylene		qty.
PHP-216B-T		$1,800.00	pH pump, 101 psi, 2.9 GPH, PTFE		qty.
PHP-217A-T		$1,899.00	pH pump, 21 psi, PTFE		qty.

† All dollar amounts on this site are shown in US currency.

Note: Each unit is supplied with foot and injection valves, 1.8 m (6') of contact cable for pulse input, and level connector.
Polypropylene models are supplied with a 3 m (10') or 1.5 m (5') length polyethylene tubing.
† Capacities and suction lifts are for water-like fluids. Higher specific gravity fluids reduce suction lift, while higher viscosity fluids reduce capacity.
* “-S” pumps have 1/4" FNPT connections.
Ordering Example: (1) PHP-214B-T PHP-214 model pump with specifications shown on the chart (opposite page) and PTFE liquid end = $1,600.00

Part Number Builder

	(1)		(2)
PHP-		B-

Option Descriptions

(1)

Code in Part Number

Select
201 for code 201
202 for code 202
203 for code 203
204 for code 204
205 for code 205
206 for code 206
207 for code 207
211 for code 211
212 for code 212
213 for code 213
214 for code 214
215 for code 215
216 for code 216
217 for code 217

(2)

Code in Part Number

Select
P for Polypropylene
T for PTFE
S for 316 Stainless Steel

NOTE: All combinations may not be valid, check spec sheet for valid part numbers.

Related Links - Related Products

Related Products

	TYPE:
	OMEGAFLEX® Low Density Polyethylene Tubing

	TYSC:
	OMEGAFLEX® Silicone Tubing – Peroxide Cured

	TYSP:
	OMEGAFLEX® Santoprene Flexible Rubber Tubing

	TYTF:
	OMEGAFLEX® CHEMCIAL TUBING FEP Formulation Metric Diameters

	TYVT6 and TYVT7:
	FKM Flexible Tubing

	TYVY:
	Vinyl Tubing

Keywords.:Chemical Metering Pumps Microprocessor-Based, High Performance