Parallel Pneumatic Grippers - Clean Room and Harsh Environent Rated |
| RPLC Series - Parallel Gripper with Clean Room Rating |
|
 |
|
|
|
|
|
$
285.00
RPLC-1M
|
| • |
Precision Gripping - Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
|
| • |
Class 10 Clean Room Rated with Corrosion Resistant Shield, Clean Room Grade Lubricant and Scavenge Port
|
| • |
Components Protected by Stainless Steel Shield for Use in Harsh Environments
|
| • |
Accuracy of 0.05 mm (0.002") and Repeatability of 0.03 mm (0.001")
|
| • |
Rigid and Low Friction Design Allows for Longer Finger lengths for Use on Delicate Parts
|
| • |
Non-Synchronous Motion Option Provides Independent Jaw Operation
|
| • |
Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
|
| • |
Operating Temperature -35 to 80°C (-30 to 180°F)
|
| • |
System Requires 0.3 to 7 bar (5 to 100 psi) Dry Filtered (40 Micron or Better) Air Supply
|
| • |
Requires 4-Way, 2 Position Valve and Regulator for Delicate Parts
|
View related products - Motion
|
| |
|
|
|
 |
RPLC Series Gripper is a pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. This gripper supports longer finger length designs compared to other grippers of similar sizes. These grippers are available in stroke lengths from 6.4 to 19.1mm (0.25 to 0.75") with a grip force from 116 to 160 N (26 to 36 lbs).
RPLC gripper are Clean Room and Harsh Environment rated with a corrosion resistant shield to protect the drive and bearing mechanism from chips and other contaminants. All internal components are lubricated with clean room grade lubricant and the scavenger port can be used with vacuum to prevent escapement of particulate. It can also be used with pressure to repel particulate away from the jaws. This gripper is designed for class 10 clean room, FDA, and medical applications.
Linear motion pneumatic components are double acting cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.
To learn more about pneumatic valves, view the Technical
Reference Article
Technical Principles of Valves
To learn more about pneumatic grippers, view the Technical
Reference Article
"Introduction to Grippers"
Omega has
"Additional Gripper Models " in stock for immediate delivery.
TECHNICAL SPECIFICATIONS
Pneumatic Specifications
Pressure Operating Range: 0.3 to 7 bar(5 to 100 psi)
Cylinder Type: Dual double acting
Dynamic Seals: Internally lubricated Buna-N
Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
Air Filtration: 40 micron or better
Air Lubrication: Not necessary*
Air Humidity: Low moisture content (dry)
Temperature Operating Range
Buna-N Seals (Standard): -35 to 80°C(-30 to 180°F)
FKMSeals (Optional): -30 to 120°C(-20 to 250°F)
Maintenance Specifications
Expected Life:
Normal Application: 5 million cycles
With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Cables and sensors sold sepatately.
Ordering Example: (1) RPLC-1M Clean room rated parallel pneumatic gripper with a stroke of 6.4mm (.025") and a grip force of 116N (26 lb)., $285
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
 |
DLT Series:
|
|
Linear Actuator Slides - Pneumatic Linear Motion Modular Series
|
|
|
|
 |
DRF Series:
|
|
DIN Rail Mount Configurable Signal Conditioners
|
|
|
|
|
 |
B72G-2AKAE3:
|
|
Norgren Excelon® Modular Compressed Air Line Filter/Regulators for control and protection of pneumatic equipment.
|
|
|
|
 |
H72A Series:
|
|
Norgren Excelon® Compressed Air Filter Combination Units
|
|
|
|
|
|
|
 |
|
|
Keywords.:grippers, gripper, Parallel Grippers, Modular Automation, Linear Motion, Pick-N-Place, 2 jaw , compressed air, automation, robotic , factory motion, end of arm tooling, Robohand, De-Sta-Co, clean room gripper, directconnect
|
Back to top
|
|
