Complete Wireless Thermocouple Connector System |
| UWTC Series |
|
 |
|
|
|
|
|
$
135.00
UWTC-1
|
| • |
User Configurable For Type J, K, T, E, R, S, B, N, C Thermocouple Input
|
| • |
Free Software Converts Your PC Into a Multi- Channel Chart Recorder or Data Logger
|
| • |
FCC Compliant (all models)
|
| • |
CE Marked (all models except UWTC-REC2-TC and UWTC-REC2-D-TC )
|
| • |
Built-In Cold Junction Compensation and Linearization
|
| • |
Patented Design Accepts Both Miniature and Standard Size Probes and Connectors
|
| • |
One Receiver Works with Multiple Wireless Remote Connectors
|
| • |
Low Power Operation and Sleep Mode For Long Battery Life
|
| • |
Each Wireless Connector Transmits Thermocouple Temperature, Ambient Temperature, Signal Strength and Battery Status in Real Time
|
| • |
Interfaces with Model UWTC-REC1 For Multi- Channel PC Chart Recording and Data Logging or Model UWTC-REC2 (Single Channel Industrial Transceiver with Analog Output and Alarm
|
View related products - Wireless Sensors, Transmitters, Receivers, Meters & Controllers
|
| |
|
|
|
 |
 Omega's new Wireless
Thermocouple Connector Series
features stand-alone, compact,
battery powered thermocouple
connectors that transmit their
readings back to a host receiver up
to 90 m (300') away.
Each unit can be programmed in the
field to work as a type J, K, T, E, R,
S, B, N or C calibration connector.
When activated the connector will
transmit readings continuously at
pre set time interval that was
programmed by the user during the
initial setup. Each unit measures
and transmits: Thermocouple Input
Reading, Connector Ambient
Temperature, RF Signal Strength
and Battery Condition to the host
and is displayed on the PC screen
in real time using the provided
software. When used with host
receiver model UWTC-REC1 data
from up to 48 wireless thermocouple
connectors can be received and
displayed. Each unit includes free
software that converts your PC into
a strip chart recorder or data logger
so readings can be saved and later
printed or exported to a spread
sheet file. When used with host
Transceiver model UWTC-REC2
wireless data from one connector
can be re-transmitted out of the
receiver by a wired connection as a
analog voltage, current or
thermocouple signal to interface
with a controller, PLC or data
acquisition board.
Specifications Thermocouple (TC) Input
Software Selectable: J, K, T, E, R, S, B, C or N Thermocouple Measurement Range:
J: -100 to 760°C (-148 to 1400°F)
K: -100 to 1260°C (-148 to 2300°F)
T: -200 to 400°C (-328 to 752°F)
E: -200 to 1000°C (-328 to 1832°F)
R: 260 to 1760°C (500 to 3200°F)
S: 260 to 1760°C (500 to 3200°F)
B: 870 to 1820°C (1598 to 3308°F)
C: 0 to 2315°C (32 to 4200°F)
N: -100 to 1260°C (-148 to 2300°F)
TC Measurement Accuracy:
Type J, K: ±0.5% of reading or ±1.0°C(1.8°F), whichever is greater
Type T, E, N: ±0.5% of reading or ±2.0°C(3.6°F), whichever is greater
Type R, S, B, C: ±0.5% of full scale
TC Measurement Resolution:
Type J, K, T, E, N: 1°C
Type R, S, B, C: 1°C
Cold Junction Compensation
(Automatic): -10 to 70°C (14 to 158°F)
Thermocouple Connection: Patented universal female accepts both standard male (OSTW Series) or miniature male (SMPW Series) mating connector
Operating Environment: -10 to 70°C (14 to 158°F)
Computer Interface: USB (one interface cable included with receiver)
Transmit Sample Rate: Programmable from 1 sample/minute to 1 sample/every 5 seconds Radio Frequency (RF) Transceiver
Carrier: ISM 2.4 GHz, direct sequence spread spectrum, license free worldwide (2.450 to 2.490 GHz -12 channels)
CE Compliance: All Models Compliant Except UWTC-REC2-TC and UWTC-REC2-D-TC
|
|
RF Output Power:
UWTC-1: 0dBm (1 mW)
UWTC-2: 10dBm (10 mW)
Range of RF Link:
UWTC-1: Up to 60 m (200') outdoor line of sight. Up to 20 m (65') indoor/urban.
UWTC-2: Up to 120 m (400') outdoor line of sight. Up to 45 m (130') indoor/urban.
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Software (Included Free): Requires Windows 98, ME, 2000, XP or Vista operating system
Connector Internal Battery: One 3.6 V lithium, 2.4 Ah capacity (AA) (included)
Battery Life (Typical- 1 sample/minute reading rate @ 25°C (77°F)):
UWTC-1, UWTC-2: 1.5 years
UWTC-NB9, UWTC-2-NEMA: 3 years
Data Transmitted to Host: Thermocouple Reading, Connector Ambient Reading, RF Transmit Strength and Battery Condition
Dimensions: 100 L x 50 W x 25 mm H (without antenna) (4 x 2 x 1")
Weight:
UWTC-1, UWTC-2: 70 grams UWTC-REC1, UWTC-REC2,
UWTC-REC2-D: 206 grams
Case:
UWTC-1, UWTC-2: ABS plastic UWTC-REC1, UWTC-REC2,
UWTC-REC2-D: Painted steel
|
Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe(please note CE compliance of the specific model for use in Europe).
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe(please note CE compliance of the specific model for use in Europe).
Comes with one 3.6 V Lithium battery, programming software, measurement and logging software, mounting bracket, Type K beaded wire thermocouple, and user manual.
Ordering Example: (1) UWTC-1 Wireless thermocouple connector/transmitter, $135.00, plus (1) UWTC-REC1 12-channel receiver, $235.00, plus (1) UWTC-BATT Spare battery, $15.00, $135.00 + 235.00 + 15.00 = $385.00
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Manual, Related Products
|
|
|
|
|
|
 |
|
|
|
Product Manual
|
|
Download
UWTC-REC3 - Wireless-to-Ethernet Receiver
|
|
Download
UWTC Series Smart Connector(TM) - Wireless Thermocouple
Connector/Transmitter/Receiver
|
|
Related Products
|
 |
UWTC-2-NEMA:
|
|
Weather Resistant Wireless Thermocouple Transmitters
|
|
|
|
 |
UWIR-2-NEMA:
|
|
Non-Contact Infrared Temperature Sensor With Wireless Transmitter
|
|
|
|
 |
UWRH-2:
|
|
Wireless Relative Humidity/Temperature Transmitter
|
|
|
|
 |
UWRTD-2:
|
|
RTD-to-Wireless Connector/Converter
|
|
|
|
|
|
|
|
 |
|
|
