Accelerometers
Laboratory Grade
for High Vibration Levels |
| ACC103 |
|
 |
|
 |
| Click here for larger image. |
|
|
|
|
|
|
|
The ACC103 laboratory accelerometer is ideal for use in shake tests, vibration labs, and other general purpose vibration applications. The ACC103 weighs only 15 grams, ideal for applications where low accelerometer weight is critical. It has a 10 mv/g output which can measure vibrations up to 500 g's.
SPECIFICATIONS
Frequency Response: 1 Hz to 10 kHz (up to ±10% rated output shift)
Rated Output: 10 mV/g nominal @ 100 Hz
Frequency Range: 2 Hz to 10 kHz (up to ±5% rated output shift)
Amplitude Range: ±500 g peak
Amplitude Linearity: ±2% up to 500 g peak
Temperature Range: -50 to 120°C (-60 to 250°F)
Temperature Sensitivity Effect: 0.06% FS/°F
Discharge Time Constant: 0.5 s min
Transverse Sensitivity: 5% of axial max
Strain Sensitivity: 0.001 g per microstrain @ 25°/µσ
Maximum g Without Clipping: ±1000 g
Mounted Resonance Frequency: >40 kHz
Output Impedance: 100 Ω
Bias Voltage: 10V nominal
Base Strain: 0.03 g/microstrain nominal
Noise Floor (Wideband): 0.007 g (rms)
Weight: 1.5 g (0.05 oz) nominal (without cable)
Material: Stainless steel
Dimensions: 7.11 H x 6.35 mm hex base (0.28 x 0.25")
Connector: 10-32 male, cable not included (order model no. ACC-CB2-10)
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) ACC103 accelerometer, (1) ACC-PS1 Battery power supply (BNCF connections), (1) ACC-CB2-10 10 foot coaxial cable (10-32/BNCM) = $625
|
|
|
|
|
| |
 |
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
ACC-PS1 and ACC-PS2:
|
Accelerometer Power Supplies, Battery Powered
|
|
ACC-PS3 and ACC-PS4:
|
Accelerometer Power Supplies, AC Powered, Single Channel and Triaxial Supply
|
|
ACC-CABLES:
|
Input/output Cables for Dynamic Sensors, Power Supplies and Instrumentation
|
|
|
|
 |
|
Back to top |
|
