Omegamation - Quality Automation Products Omegamation 1-888-55-OMEGA | 1-888-55-66342
Navigation Image Map
Contact UsView CartHelp
search by:          
Home Online Store Products Literature My Omega Omega Info

Stepper Motor Drive

2035  
New! CE Made in the USA
2035:Stepper Motor Drive
Click here for larger image.
   
$ 135.00  2035
Wide Range of Motor Sizes
70 W of Usable Power
Pulse Width Modulation Switching Amplifiers
DC Bus Voltage 12 to 35 Vdc Motor Supply (Including Ripple)
Phase Current from 0.125 to 2.0 A (Switch Selected, 16 Settings)
Step, Direction and Enable Inputs, Optically Isolated, 5 to 24V
Inputs Can be Sourcing (PNP) or Sinking (NPN) Type
Full and Half Step (Switch Selected)
Automatic 50% Idle Current Reduction (Switch Selected)
Compact Size: 38.1 x 67.2 x 101.6 mm (1.5 x 3 x 4")
CE Compliant

View related products - Drives & Motors
Scroll below to order View spec PDF Related Products

The 2035 step motor driver is a full or half-step phase sequencer with three state switching amplifiers and optoisolated circuits. The drive also includes an automatic feature to lower motor current by 50% anytime the motor is left at rest for more than one second. This feature can be disabled. The amplifier regulates motor current by chopping at a constant, inaudible frequency. Phase current is selected from 16 levels by a DIP switch. Full or half-step resolution is switch selectable.

SPECIFICATIONS
Amplifiers: Dual, bipolar H-bridge, pulse width modulated switching at 20 KHz. 12 to 35 Vdc input. 0.125 to 2.0 A/phase output current, switch selectable in 0.125 A increments. 70 W maximum output power. Automatic idle current reduction, reduces current to 50% of setting after one second.
Inputs: Step, direction and enable, optically isolated, 5 to 24V logic. 2200Ω input impedance. Motor steps when STEP input turns off. 10 µsec minimum low pulse. 50 µsec minimum set up time for direction signal. Step input is run/stop in oscillator mode. (0 =run, 1 = stop).
Physical: Mounted on 1.4 inch thick black anodized aluminum heat transfer chassis. 38.1 x 76.2 x 101.6 mm (1.5 x 3.0 x 4.0") overall. Power on red LED.
Maximum Chassis Temperature: 70°C (158° F)
Weight: 250 g (9 oz)
Ambient Temp Range (Operating): 0 to 70°C (32 to 158° F)
Connectors: European style screw terminal blocks
Power Supply: 2 position
Motor: 4 position
Signal Input: 4 position
Max Wire Size: 16 AWG


To Order (Specify Model Number)    
 Part Number   Availability   Price    Description    Qty.
 2035 in-stock    $135.00     Stepper motor drive  
 Recommended Motors
 OMHT11-013 in-stock    $91.50     NEMA 11, 1080g-cm (15oz-in) holding torque  
 OM5014-842 in-stock    $75.00     NEMA 14, 1872g-cm (26oz-in) holding torque  
 OMHT17-075 in-stock    $67.00     NEMA 17, 4522g-cm (62.8oz-in) holding torque  
 OMHT23-397 in-stock    $91.00     NEMA 23, 12746g-cm (177oz-in) holding torque  
 OMHT23-400 in-stock    $113.00     NEMA 23, 19011g-cm (264oz-in) holding torque  
All dollar amounts on this site are shown in US currency.

 Ordering Example: (1) 2035 Stepper motor drive = $135

 Related Links - Related Products
 Related Products
   OMHT Series: Stepper Motors
   PS Series: Power Supplies for Open Frame Stepper Drives
   
Keywords:Stepper Motor Drive

   Back to top
© Copyright 2003-2008  |  OMEGA ENGINEERING, Inc. | OMEGA Privacy Statement  |  Terms and Conditions
MXV MMV | 72
VerisignAmexVisaMC