 |
Common extension wire types are made up into standard multipair cables. Each conductor is covered with a polyvinyl jacket, nominal 0.015" (0.38 mm) thick, and the pairs are individually twisted. Clear Mylar tape is then wrapped around the bundle of twisted pairs. A solid tinned-copper drain wire is laid over the bundle, which is covered with aluminum-backed Mylar tape to serve as an electro static shield. The drain wire provides a simple mechanical termination for the shield. The cable is then covered with a jacket of polyvinyl approximately 0.045" (1.1 mm) thick.
As an added convenience, each standard cable contains an extra polyvinyl-clad solid tinned-copper wire for use as a ground connection, or to complete a communication or signal circuit. Standard cables are color-coded. The individual pairs are marked 1-1, 2-2, etc., for easy identification. Insulation will withstand temperatures up to 221°F (105°C).
Overbraiding
Any standard item can be overbraided with tinned copper, stainless steel or Inconel upon request.
Special Orders
Multipair extension cable can be made to order with insulation to suit your installation requirements. Consult Sales Department on pricing and quantity minimums.
Multipair Pricing
Multipairs can be purchased in any quantity (minimum length 25 feet).
Minimum Bending Radius
4 pair cable: 6 times overall diameter.
8 pair cable: 10 times overall diameter.
Over 8 pair cable: 14 times overall diameter.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for other available models.
For complete product specifications see the Related Links section at the bottom of this page.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note:
Aluminum-backed Mylar wrap with 20 gage solid tinned-copper bare drain wire in contact with aluminum-backed Mylar
Ordering Example: (1) 8KX20PP 8 pairs of type K extention grade cable, 20 gage with polyvinyl instalation = $7.25
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Number of Pairs (Twisted)
|
| |
Select
4 for 4 pairs
8 for 8 pairs
12 for 12 pairs
16 for 16 pairs
20 for 20 pairs
24 for 24 pairs
|
(2)
|
Thermocouple Type
|
| |
Select
KX for Type K
JX for Type J
TX for Type T
|
(3)
|
Gage Type
|
| |
Select
20 for 20 AWG
24S for 24 Stranded AWG
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
 |
|
|
| |
|
Keywords:Multipair Thermocouple Extension Cable, Multipair cable, Multipair wire, shielded cable, shielded wire
|
Back to top |
|
|
