Low Profile Industrial Grade Accelerometers

ACC787A

Industrial Low Profile Accelerometer

Click for larger image.

^$ 245.00 ACC787A

•	Corrosion Resistant
•	Reverse Wiring Protection
•	Rugged Industrial Design
•	Ground Isolated
•	ESD Protection
View related products - Dynamic Measurement

The OMEGAROMETER Series accelerometers are one of the best accelerometers designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC787A is a general purpose accelerometer with a low profile side cable exit.

SPECIFICATIONS
DYNAMIC
Sensitivity, ±10%, 25°C (77°F): 100 mV/g
Acceleration Range¹: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
   ±10%: 1.0 to 5000 Hz
   ±3 dB: 0.7 to 10,000 Hz
Resonance Frequency: 22 kHz
Transverse Sensitivity, Max: 5% of axial
ELECTRICAL
Power Requirement:
Voltage Source¹: 18 to 30 Vdc
Current Regulating Diode^1,2: 2 to 10 mA
Electrical Noise, Equiv. g Nominal:
Broadband: 2.5 Hz to 25 kHz: 700 µg
Spectral:
   10 Hz: 10 µg√Hz
   100 Hz: 5 µg√Hz
   1000 Hz: 5 µg√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage, Nominal: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Shock Limit: 5000 g peak
Electromagnetic Sensitivity, Equiv. g, Max: 70 µg/gauss
Sealing: Hermetic to 10^-8 cc/s
Base Strain Sensitivity, Max: 0.002 g/microstrain
PHYSICAL
Weight: 145 g (5.1 oz)
Case Material: 316L SS
Mounting: ¼-28 captive hex head screw with 1.2 mm (0.046") diameter safety wire hole
Connector: 2 pin, MIL-C-5015 style
Connections:
   Pin A: Power/signal
   Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10

NOTES:
1 To minimize signal distortion when driving long cables or high-vibration signals, 24 to 30 Vdc powering is recommended. The higher-level constant current source should be used when driving long cables.
2 A maximum current of 6 mA is recommended for operating temperatures above 100°C (212°F).

To Order (Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number	Availability	Price	Description	Qty.
ACC787A		$245.00	General purpose accelerometer with side exit connector	qty.


Accessories

ACC-CB7-10		$60.00	3.05 m (10') MIL/BNC twisted pair shielded cable	qty.

ACC-CB7-10WP		$90.00	3.05 m (10') waterproof twisted pair shielded cable	qty.

ACC-B3		$90.00	Magnetic mounting base for flat surfaces, 30 lb force	qty.

ACC-B5	7 Weeks	$125.00	Magnetic mounting base for curved surfaces, 30 lb force	qty.

ACC-PS2		$530.00	Rechargeable power supply with built-in amplifier	qty.

ACC-PS3		$525.00	115 VAC powered power supply	qty.

ACC-PS3-230VAC		$475.00	230 VAC powered power supply	qty.

† All dollar amounts on this site are shown in US currency.

Note: ACC787A includes captive mounting screw and calibration data. Specify cable separately, see Accessories. ACC787A + ACC-CB7-10 + ACC-B3 + ACC-PS2, is a typical accelerometer system.
Ordering Example: (1) ACC787A Accelerometer, $245.00, plus (1) ACC-CB7-10 Cable, $60.00, plus (1) ACC-B3 Magnetic mounting base, $90.00, plus (1) ACC-PS2 Rechargeable power supply, $530.00, $245.00 + 60.00 + 90.00 + 530.00 = $925.00

Related Links - Related Products

Related Products

	HHVB82:
	Handheld Vibration Meter

	ACC-PS1 and ACC-PS2:
	Accelerometer Power Supplies, Battery Powered

	ACC-PS1 and ACC-PS2:
	Accelerometer Power Supplies, Battery Powered

	ACC-CABLES:
	Input/output Cables for Dynamic Sensors, Power Supplies and Instrumentation

Keywords:best accelerometer, accelarometer, accelorometer, gripper arm load sensors torque calibration