 |
| CFM | Max. Watts/Linear Inch
of Heated Length |
|---|
| 1 | 150 |
| 2 | 150 |
| 4 | 150 |
| 6 | 150 |
| 8 | 150 |
| 10 | 150 |
| 20 | 175 |
| 30 | 275 |
| 40 | 350 |
| 50 | 450 |
| 60 | 525 |
APPLICATIONS
The AHF series maximum flow air heaters are used with blowers or recirculating air in baking, drying, and preheating applications.
This air heater is designed with a 23/8" O.D. aluminum tube and a cross frame heating element for minimum resistance to air flow. The nickel-chrome heating element is insulated by ceramic beads on a stainless steel support frame which is firmly secured to the inside of the tube. Post terminals enclosed in a junction box simplify the wiring. A four-inch round flange with pre-drilled holes at the inlet side are used for mounting the heater. It has a practical operating range of up to 200 CFM with temperatures up to 600 °F (315°C).
Calculate the flow rate, temperature
rise, or power requirement as
follows:
Watts = SCFM x ΔT/3
SCFM = Standard Cubic Feet Per Minute
ΔT = Temperature Rise inDegrees F from the Inlet to the Outlet
Minimum flow rates are given in the table below.
SPECIFICATIONS
Maximum Amperage: 15
Cross Sectional Flow Area: 3.5 square inches
Threaded Terminals: 6-32
| Model Number |
Volts |
Watts |
Heated Length in (mm) |
Watts/Inch** |
Maximum CFM |
Length in (mm) |
Weight lb (kg) |
| 120 VAC Models |
| AHF-06120 | 120 | 600 | 4 (102) | 150 | 200 | 6 (152) | 0.5 (0.23) |
| AHF-10120 | 120 | 1000 | 8 (203) | 125 | 200 | 10 (254) | 1.25 (0.57) |
| 120/240 VAC Models* |
| AHF-12240 | 120
240 | 375
1500 | 10 (254)
10 (254) | 38
150 | 200
200 | 12 (305) | 1.5 (0.68) |
| AHF-14240 | 120
240 | 500
2000 | 12 (305)
12 (305) | 42
166 | 200
200 | 14 (356) | 1.75 (0.79) |
*These air heaters can be operated on either 120 or 240 Volts. Specifications are given for operation on both 120 and 240 Volts.
**Indicates Watts per inch of heated length. Use the table above to determine minimum required flow rates. The Watts per inch of heated length can
be changed by reducing the operating voltage or by ordering a custom made heater. Stainless steel construction also available. Consult Engineering.
|
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) AHF-12240 air heater, 240 Vac, 1500 W = $150
|
|
|
|
|
| |
|
Keywords:MAXIMUM FLOW AIR HEATERS, For Low Pressure, High Flow Air Heating
|
Back to top |
|
|
