Rugged Clean Water Immersion Heater—2" NPT Brass Fitting |
| ARMT-2 Series |
|
 |
|
|
|
|
|
$
650.00
ARMT-2155/120V
|
| • |
Ideal For Clean Liquids within pH 6 to pH 8 Range
|
| • |
Quality Construction with Copper Sheath
|
| • |
Models Available with 120V, 208V, 240V, or 480V, 1 Phase Power
|
| • |
Integral Thermostat
|
View related products - Immersion Heaters
|
| |
|
|
|
 |
The OMEGALUX® ARMT-2 Series clean water immersion heater
feature 2" NPT brass fitting screw plug for direct heating of the process
fluid in your tank or vessel. Tested design characteristics assure years
of dependable performance.
Please Note: The integral thermostat functions as a
temperature control only. This is not a fail safe device.
An approved pressure or temperature control should
be used with these heaters to assure safe operation.
See the Temperature Section for our full selection of control devices.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or
installed or used by non-qualified personnel. See inside back cover
for additional warning.
T-2 Temp.Range (60°-250°F)
Model No. |
T-1 Temp.Range (0°-100°F)
Model No. |
kW |
Phase |
W/in2 |
No.
Elem. |
Dim. B
in (cm) |
| ARMT-2155/* | ARMT-2155T1/* | 1.5 | 1 | 48 | 1 | 12 (30) |
| ARMT-2205-3/** | ARMT-2205-3T1/** | 2 | 1 | 51 | 2 | 8 (20) |
| ARMT-2255/*** | ARMT-2255T1/*** | 2.5 | 1 | 48 | 2 | 91/2 (20) |
| ARMT-2305/** | ARMT-2305T1/** | 3 | 1 | 48 | 2 | 12 (30) |
| ARMT-2405/*** | ARMT-2405T1/*** | 4 | 1 | 48 | 2 | 18 (46) |
| ARMT-2505/*** | ARMT-2505T1/*** | 5 | 1 | 53 | 2 | 19 13/16 (39) |
| ARMT-2605/*** | ARMT-2605T1/*** | 6 | 1 | 47 | 2 | 251/8 (64) |
| ARMT-2705/*** | ARMT-2705T1/*** | 7 | 1 | 49 | 2 | 28 (71) |
| ARMT-2105/*** | ARMT-2105T1/*** | 10 | 1 | 46 | 2 | 40 1/2 (103) |
| ARMT-2125/240 | ARMT-2125T1/240 | 12 | 1 | 46 | 2 | 48 (122) |
| ARMT-2125/480 | ARMT-2125T1/240 | 12 | 1 | 46 | 2 | 48 (122) |
| ARMT-21505/240 | ARMT-21505T1/240 | 15 | 1 | 50 | 2 | 54 (137) |
/* Designate voltage; 120, 208, 240 VAC.
/** Designate voltage; 120, 208, 240 480 VAC.
/*** Designate voltage; 208, 240 480 VAC.
To order the unit with the optional E2 enclosure, insert E2 into the part number as shown, ARMT-2255E2T1/240.
* E2 enclosure not intended for use in hazardous areas.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) ARMT-2255/480V 2.5kW heater powered by 480 VAC, $675.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Part Number Code(see table above)
|
| |
Select
2155 for code 2155
2205-3 for code 2205-3
2255 for code 2255
2305 for code 2305
2405 for code 2405
2505 for code 2505
2605 for code 2605
2705 for code 2705
2105 for code 2105
2125 for code 2125
2125 for code 2125
21505 for code 21505
|
(2)
|
Optional E2 Enclosure
|
| |
Select
Nothing(leave field blank) for no enclosure
E2 for optional E2 enclosure
|
(3)
|
Model
|
| |
Select
Nothing(leave field blank) for model T-2
T1 for model T-1
|
(4)
|
Voltage
|
| |
Select
120V for 120 Vac
208V for 208 Vac
240V for 240 Vac
480V for 480 Vac
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | |
|
|
|
|
|
|
|
|
Keywords:Rugged Clean Water Immersion Heater—2" NPT Brass Fitting
|
Back to top
|
