Immersion heaters, Incoloy Sheath—2" NPT fitting |
| ARMTI-2 Series |
|
 |
|
|
|
|
|
$
1,100.00
ARMTI-2255/240V
|
| • |
The Ideal Immersion Heater for Severe, Hard Water pH 5 to 9
|
| • |
Integral Thermostat
|
| • |
2" NPT Stainless Steel Fitting with 2 Heating Elements
|
| • |
Available with NEMA-1 Rated General Purpose Enclosure, or Explosion Resistant Enclosure
|
| • |
240 or 480 V, 1 Phase Power
|
| • |
46 to 51 W/in2 Watt Density
|
View related products - Immersion Heaters
|
| |
|
|
|
 |
Please Note: The integral thermostat functions as a temperature control only. This is not a fail safe device. An approved pressure or temperature control should be used with these heaters to assure safe operation. See Section P for our selection of control devices.
SPECIFICATIONS
Wattage: 2 to 15 kW Power: 240, or 480V: 1 phase Sheath: 475" diameter Incoloy Screw Plug: 2" NPT Stainless Steel Thermostat: Bulb and capillary Enclosure: General Purpose, NEMA-1 rated, or type E2 moisture resistant/explosion resistant enclosure.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) ARMTI-2255/240V A 2.5 kW heater with a thermostat range of 60-250°F powered by 240 VAC, $1,100.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Wattage
|
| |
Select
205-3 for 2 kW
255 for 2.5 kW
305 for 3 kW
405 for 4 kW
505 for 5 kW
605 for 6 kW
705 for 7 kW
1005 for 10 kW
1205 for 12 kW
1505 for 15 kW
|
(2)
|
Temperature Range and Enclosure Style
|
| |
Select
/ for 60-250°F with a General Purpose Terminal Enclosure
T1/ for 0-100°F General Purpose Terminal Enclosure
E2/ for 60-250°F with a Moisture Resistant/Explosion Resistant Enclosure
E2T1/ for 0-100°F with a Moisture Resistant/Explosion Resistant Enclosure
|
(3)
|
|
| |
Select
240V for 240 Vac
480V for 480 Vac
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
|
|
|
|
|
Keywords:Immersion heaters, Incoloy Sheath—2" NPTfitting
|
Back to top
|
