 |
Please Note: The integral thermostat functions as a temperature control only. This is not a fail safe device. An
approved pressure or temperature control should be used with these heaters to assure safe operation.
See Section P for our selection of control devices.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or
installed or used by non-qualified personnel. See inside back cover
for additional warnings.
| kW |
Phase |
W/in2 |
No. Htg.
Elem. |
Dim.B
in(cm) |
Temp Range (60-250°F)
Model No. |
Wt.
lb(kg) |
T-1 Temp Range (0-100°F)
Model No. |
Wt.
lb(kg) |
| ARMTI-3 Series with General Purpose Terminal Enclosure1 |
| 3 | 3 | 51 | 3 | 7(17) | ARMTI-3305/* | 8(4) | ARMTI-3305T1/* | 8(4) |
| 4.5 | 3 | 48 | 3 | 11(30) | ARMTI-3455/* | 8(4) | ARMTI-3455T1/* | 8(4) |
| 6 | 3 | 48 | 3 | 17 3/8(44) | ARMTI-3605/* | 9(4) | ARMTI-3605T1/* | 9(4) |
| 7.5 | 3 | 53 | 3 | 19(48) | ARMTI-3755/* | 10(5) | ARMTI-3755T1/* | 10(5) |
| 9 | 3 | 47 | 3 | 24 3/8(62) | ARMTI-3905/* | 10(5) | ARMTI-3905T1/* | 10(5) |
| 12 | 3 | 46 | 3 | 32 1/4(64) | ARMTI-3120/* | 11(5) | ARMTI-3120T1/* | 11(5) |
| 15 | 3 | 46 | 3 | 39 7/8(101) | ARMTI-3150/* | 12(5) | ARMTI-3150T1/240 | 12(5) |
| 18 | 3 | 51 | 3 | 47 3/8(120) | ARMTI-3180/* | 13(6) | ARMTI-3180T1/240 | 13(6) |
| ARMTI-3 Series with Type E2 Moisture Resistant/Explosion Resistant Enclosure2 |
| 3 | 3 | 51 | 3 | 7(17) | ARMTI-3305E2/* | 13(6) | ARMTI-3305E2T1/* | 13(6) |
| 4.5 | 3 | 48 | 3 | 11(30) | ARMTI-3455E2/* | 13(6) | ARMTI-3455E2T1/* | 13(6) |
| 6 | 3 | 48 | 3 | 17 3/8(44) | ARMTI-3605E2/* | 14(6) | ARMTI-3605E2T1/* | 14(6) |
| 7.5 | 3 | 53 | 3 | 19(48) | ARMTI-3755E2/* | 15(7) | ARMTI-3755E2T1/* | 15(7) |
| 9 | 3 | 47 | 3 | 24 3/8(62) | ARMTI-3905E2/* | 15(7) | ARMTI-3905E2T1/* | 15(7) |
| 12 | 3 | 46 | 3 | 32 1/4(82) | ARMTI-3120E2/* | 16(7) | ARMTI-3120E2T1/* | 16(7) |
| 15 | 3 | 46 | 3 | 39 7/8(101) | ARMTI-3150E2/* | 17(8) | ARMTI-3150E2T1/* | 17(8) |
| 18 | 3 | 51 | 3 | 47 3/8(120) | ARMTI-3180E2/* | 18(8) | ARMTI-3180E2T1/* | 18(8) |
/*Insert 240 for 240 Vac or 480 for 480 Vac. *Not intended for use in hazardous areas.
1. Heaters with General Purpose Enclosures are UL Listed and CSA Certified.
2. Heaters with Moisture Resistant/Explosion Resistant Enclosures are CSA NRTL/C Certified and not
intended for use in hazardous areas.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Wattage
|
| |
Select
305 for 3 kW
455 for 4.5 kW
605 for 6 kW
755 for 7.5 kW
905 for 9 kW
120 for 12 kW
150 for 15 kW
180 for 18 kW
|
(2)
|
Temperature Range and Enclosure Style
|
| |
Select
Nothing(leave field blank) for 60-250°F with a General Purpose Terminal Enclosure
T1 for for 0-100°F General Purpose Terminal Enclosure
E2 for 60-250°F with a Moisture Resistant/Explosion Resistant Enclosure
E2T1 for 0-100°F with a Moisture Resistant/Explosion Resistant Enclosure
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
|
|
|
 |
|
|
| |
|
Keywords:Heavy Duty Solution Water Immersion Heaters—2 1/2 " NPT Fitting
|
Back to top |
|
|
