 |
ARTM Series screw plug immersion heaters are designed for direct contact heating in clean water applications. Please Note: The integral thermostat functions as a temperature control only. this not a fail safe device. An approved pressure or temperature control should be used with these heaters to assure safe operation. See section P for our full selection of control devices.
SPECIFICATIONS
Wattage: .75 to 3 kW Power: 120 or 240 VAC, 1 phase Sheath: 0.315" (.800 cm) diameter copper Screw Plug: 1" NPT brass Thermostat: bulb and capillary type, 3 temperature ranges available; 60-187°F, 60-240°F, or 0-127°F Watt Density: 64-68 W/in2 Enclosure: General Purpose NEMA-1; optional moisture tight/explosion resistant
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: For More details click on Download at the bottom of this page under Related Links
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Wattage
|
| |
Select
750 for .75 kW
1000 for 1.0 kW
1250 for 1.25 kW
1500 for 1.5 kW
2000 for 2.0 kW
2500 for 2.5 kW
3000 for 3.0 kW
|
(2)
|
Temperature Range
|
| |
Select
/ for Temp.Range (60°-187° F)
TH/ for Temp.Range (60°-240° F)
TL/ for Temp.Range (0°-127°F)
|
(3)
|
Voltage
|
| |
Select
120V for 120 Vac
240V for 240 Vac
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
 |
|
|
| |
|
Keywords:Clean Water Immersion Heater with Integral Thermostat, 1" NPT Fitting
|
Back to top |
|
|
