The B72G Series Air Line Filter / Pressure Regulators are
designed for use as a single in-line unit or as part of a Norgren's Excelon® modular compressed air preparation supply system.
This air line filter / regulator is designed for high efficiency water and
particle removal, and comes with a push to lock adjusting knob.
As a modular pneumatic component, this air line
filter / regulator can quickly be attached to oilers, smooth start / exhaust
valves, safety lockout valves and pipe adapters. With our
Quickclamp® and Quickclamp® and wall bracket
accessories, a complete compressed air supply system can
be assembled and mounted in minutes.
SPECIFICATIONS Fluid: Compressed air
Maximum Pressure: Transparent Bowl: 10 bar (150 psig)
Metal Bowl: 17 bar (250 psig)
B72G with Metal Bowl and
Auto Drain: 10 bar (150 psig)
Operating Temperature*: Transparent Bowl: -34 to 50°C
(-30 to 125°F)
Metal Bowl: -34 to 80°C
(-30 to 175°F)
Metal Bowl: Zinc
Liquid Level Indicator Lens
(Metal Bowl): Transparent nylon
Element: Sintered polypropelene
Elastomers: Neoprene and nitrile
B73G AND B74G MATERIALS Body and Bonnet: Aluminum
Transparent Bowl: Polycarbonate
Guarded Transparent Bowl:
Polycarbonate with steel
Metal Bowl: Aluminum
Liquid Level Indicator Lens
(Metal Bowl): Transparent nylon
(Pyrex® optional)
Element: Sintered polypropelene
Elastomers: Neoprene and nitrile
*Air supply must be dry enough
to avoid ice formation at temperatures
below 2°C (35°F)
† All dollar amounts on this site are shown in US currency.
Note: Models listed include PTF threads, knob adjustment, automatic or manual drain, metal bowl with liquid level indicator, relieving diaphragm, 0.3 to 10 bar (5 to 150 psig) outlet pressure adjustment range. *Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. Typical flow with 10 bar (150 psig) inlet pressure, 6.3 bar (90 psig) set pressure and a 1 bar (15 psig) droop from set. Ordering Example: (1) B72G-2AK-AE3-RMG Filter/regulator with ¼" port, flow of up to 80 scfm, metal bowl with liquid level indicator, knob adjustment and PTF threads., $87.50, plus (1) B73G-3AK-AD3-RMG Filter/regulator with 3⁄8" port, flow up to 123 scfm, metal bowl with liquid level indicator, knob adjustment and PTF threads., $129.00, $87.50 + 129.00 = $216.50