 |
CBH Series heaters are constructed of rugged metal sheathed tubular elements homogeneously combined
with a metal sleeve that has been accurately dimensioned to provide a proper clearance and ease of
inserting into standard drill hole sizes so large bolts or studs may be rapidly expanded and tightened with
a wrench, providing ‘’shrink fit tightness” when cool
Useful in assembly of large compressors, presses, turbines, die blocks, cylinders, engine heads,
pressure vessels, etc. Quick heat-up is important to avoid heat drain-away of surrounding metal. CBH heaters
are generally used in sets to permit uniform tightening of mating parts.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed
or used by non-qualified personnel. See inside back cover for additional warning.
| Watts |
Dimensions Inches (cm) |
Max. Stud
Hole Dia.† |
Model No. |
Weight
Ib (kg) |
A
Lgth. |
B Htd.
Lgth. |
C Htd.
Dia. |
D Cold
End |
E Cold
End |
| 1150 | 18(46) | 12(30) | .553 (1.4) | 1 1/8 (3) | 6 7/8(17) | .616(1.6) | CBH-1815/120V | 5(2) |
| 1500 | 24(61) | 18(46) | .553 (1.4) | 1 1/8(3) | 6 7/8(17) | .616(1.6) | CBH-2415/120V | 5(2) |
| 2250 | 30(76) | 24(61) | .553 (1.4) | 2 1/8 (3) | 6 7/8(17) | .616(1.6) | CBH-3025/* | 5(2) |
| 2600 | 36(91) | 30(76) | .553 (1.4) | 2 1/8(3) | 6 7/8(17) | .616(1.6) | CBH-3625/* | 5(2) |
| 1200 | 18(46) | 12(30) | .660(1.7) | 3 1/8 (3) | 6 7/8(17) | .735(1.9) | CBH-1816/120V | 6(3) |
| 1700 | 24(61) | 18(46) | .660(1.7) | 3 1/8(3) | 6 7/8(17) | .735(1.9) | CBH-2416/120V | 6(3) |
| 2300 | 30(76) | 24(61) | .660(1.7) | 4 1/8 (3) | 6 7/8(17) | .735(1.9) | CBH-3026/120V | 6(3) |
| 2800 | 36(91) | 30(76) | .660(1.7) | 4 1/8(3) | 6 7/8(17) | .735(1.9) | CBH-3626/120V | 6(3) |
| 1700 | 18(46) | 12(30) | .730(1.9) | 1 1/4(3) | 6 3/4(17) | .860(2.2) | CBH-1827/120V | 5(2) |
| 2500 | 24(61) | 18(46) | .730(1.9) | 1 1/4(3) | 6 3/4(17) | .860(2.2) | CBH-2427/120V | 5(2) |
| 4200 | 36(91) | 30(76) | .730(1.9) | 1 1/4(3) | 6 3/4(17) | .860(2.2) | CBH-3647/120V | 6(3) |
| 6000 | 48(122) | 42(107) | .730(1.9) | 1 1/4(3) | 6 3/4(17) | .860(2.2) | CBH-4867/** | 6(3) |
| 7500 | 60(152) | 54(137) | .730(1.9) | 1 1/4(3) | 6 3/4(17) | .860(2.2) | CBH-6177/240V | 7(3) |
| 2700 | 24(61) | 18(46) | .855(2.2) | 1 1/4(3) | 6 3/4(17) | .985(2.5) | CBH-2438/240V | 7(3) |
| 3600 | 30(76) | 24(61) | .855(2.2) | 1 1/4(3) | 6 3/4(17) | .985(2.5) | CBH-3048/120V | 8(4) |
| 5300 | 42(107) | 36(91) | .855(2.2) | 1 1/4(3) | 6 3/4(17) | .985(2.5) | CBH-4258/** | 8(4) |
| 6500 | 48(122) | 42(107) | .855(2.2) | 1 1/4(3) | 6 3/4(17) | .985(2.5) | CBH-4868/240V | 9(4) |
| 6000 | 42(107) | 36(91) | .980(2.5) | 1 1/4(3) | 6 3/4(17) | 1.110(2.8) | CBH-4269/** | 9(4) |
| 8000 | 54(137) | 48(122) | .980(2.5) | 1 1/4(3) | 6 3/4(17) | 1.110(2.8) | CBH-6189/240V | 9(4) |
† Hole diameter should be held as close to heater diameter as possible for maximum heat transfer and heater life.
* Designate voltage, Insert 120V for 120 VAC or 240V for 240 VAC.
Those model numbers containing /120,/240, or /480 are available only in that voltage.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) CBH-3025/240V 2252 watt, 240 VAC stud heater = $1025
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
DIM A
|
| |
Select
18 for 18 in.
24 for 24 in.
30 for 30 in.
36 for 36 in.
42 for 42 in.
48 for 48 in.
61 for Code 61
|
(2)
|
Code in Part Number
|
| |
Select
15 for code 15
16 for code 16
25 for code 25
26 for code 26
27 for code 27
38 for code 38
47 for code 47
48 for code 48
58 for code 58
67 for code 67
68 for code 68
69 for code 69
77 for code 77
89 for code 89
|
(3)
|
Voltage
|
| |
Select
120V for 120 V
240V for 240 V
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
 |
|
|
| |
|
Keywords:ELECTRIC STUD HEATERS
|
Back to top |
|
|
