The CCT series DIN rail signal conditioners are
designed to accept a broad range of input signals, such
as ac and dc voltage and current, frequency,
temperature (thermocouple and RTD), and process
transducers, and provide standard process outputs of
either 0/4 to 20 mA, or 0 to 10 Vdc. The CCT series
features a modern housing design, that is easily
mounted on standard DIN rails. Connections are safely
and securely made, with input and output connections
on the opposite sides of the module.
Internal Design
The CCT series is designed using an internal plug-in
three module system that provides flexibility in selecting
and changing the power supply, input signal and output
signal. The units are supplied with 110 Vac power standard,
Consult sales for 220 Vac, and 24 Vdc power.
Isolation
The three internal modules in each signal conditioner
(signal input, signal output and power supply) are
isolated up to 2 kVeff.
Outputs
Each CCT series signal conditioner is available with
current and voltage output (only one may be used at a
time). Available output types include 4 to 20 mA or 0 to
20 mA (jumper-selectable) and 0 to 10 Vdc.
Standard outputs are linear and proportional to the
signal input. Thermocouple input modules feature
special circuitry to linearize the output to the actual
temperature, and not to the non-linear signal produced
by thermocouple sensors.
Specifications Power: 110 Vac (standard); 220 Vac or 24 Vdc (optional)
(±10% tolerance on all power supplies) Output: 4 to 20 mA and 0 to 10 Vdc standard;
0 to 20 mA via jumper select Accuracy: ≤0.2% or ≤0.3,%, depending on the model Response Time: ≤250 ms Isolation: 2 kVeff Ripple: ≤0.5% Bandpass: 1.5 Hz (-3 dB) Operating Ambient: -10 to 60°C (14 to 140°F) Storage Ambient: -30 to 80°C (-22 to 176°F) Temperature Coefficient: ≤0.015%/°C Power Consumption: 1.5 VA max Enclosure: Polycarbonate, RAL 7032; UL 94 V-1,
IP40 protection Terminal Housing: Polycarbonate, UL 94-2,
IP20 protection Max Wire Size: 4 mm2 (14 AWG) Dimensions: 75 H x 45 W x 110 mm D
(2.95" x 1.77" x 4.33") Weight: 270 g (0.6 lb) Mounting: DIN rail 46277 and EN 50022 (35 x 7.5 mm)
† All dollar amounts on this site are shown in US currency.
Note: *The CCT-08 signal frequency range is 20 Hz to 6KHz.
