OMEGA’s rugged Compression Fitting Thermocouples are ideally suited for measuring plastic processing machinery temperatures at the crosshead, die, and barrel. It is ideal. The maximum length for armored cable is 40 feet (5 feet is standard). Dual elements are available. The standard termination is Style 1 or Style 2. Style 3 is available upon special request. Probes with 45°bends are also available. Consult Sales Department for availability.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for other available models.
† All dollar amounts on this site are shown in US currency. Note: Price includes 3 /16" sheath diameter probes, brass compression fitting with 1 /8" NPT, and 1.5 m (60") lead length. Grounded junction standard. Ungrounded also available.
“B” Lengths over 60" are available; change the “60” to desired length in inches, and add $2.25/ft. Longer “A” Lengths are available at $ 1.00/inch
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (3) CF-000-J-2-60-1 Compression fitting style, Type J thermocouple with an “A” dimension of 100 mm (2, $27.000
Part Number Builder
Build Your Part Number Below
Straight or 90 Degree Angle Probe select from: 000 for Straight Probe 090 for 90 Degree Angle Probe
Thermocouple Type select from: J for J Thermocouple K for K Thermocouple T for T Thermocouple E for E Thermocouple
Probe Length “A” Dimension select from: 2 for 2 Inches “A” Dimension 4 for 4 Inches “A” Dimension
Termination Style select from: 1 for Spade Lugs 2 for OST Male Connector
Junction Type select from: Nothing(leave field blank) for Grounded -UNGROUNDED for Ungrounded
Note: All combinations may not be valid, check spec sheet for valid part numbers.