 |
The CLDTX series chlorine dioxide sensors and FCLTX series free
chlorine sensors feature amperometric measurement technology.
Both series are designed for use in water treatment disinfection
applications and for use with chlorine dioxide or chlorine
generators, pools, etc. The sensors are available in several ranges
for detecting ppm levels of chlorine dioxide or free chlorine.
Choose the CLDTX-101 for 0 to 1 ppm, CLDTX-102 for 0 to 2 ppm
and CLDTX-110 for 0 to 10 ppm of chlorine dioxide. Choose the
FCLTX-102 for 0 to 2 ppm, FCLTX-105 for 0 to 5 ppm and FCLTX-
110 for 0 to 10 ppm of free chlorine. Membrane caps and fill
solution are easily replaced to maximize sensor life. Sensors can
be used in new installations with Omega flow cell or installed as
replacement for other 4 to 20 mA output chlorine dioxide ClO2 or
free chlorine (FCl) sensors.
SPECIFICATIONS
Measuring Range:
CLDTX: 0 to 1, 0 to 2, or 0 to 10 ppm ClO2
FCLTX: 0 to 2, 0 to 5, or 0 to 10 ppm free chlorine
pH Range:
CLDTX: 4 to 11
FCLTX: 5.5 to 9
Cross Sensitivity:
CLDTX: Ozone, free chlorine, and monochloramine
FCLTX: Bromine, ozone and ClO2 (chlorine dioxide)
Body Material: PVC
Temperature Range: 0 to 45°C (32 to 113°F)
Temperature Compensation: Integrated
Maximum Pressure: 1 Bar (14.7 psig)
Cable Length: 3 m (10') 2 conductors
Flow Cell Process Connection: 1.4 FNPT inlet and outlet
Output: 4 to 20 mA
Flow Range:
Minimum: 45 l/hr (0.2 gpm)
Maximum: 135 l/hr (0.6 gpm)
Supply Voltage: 12 to 24 Vdc, 250 mA min
Chemical Compatibility: Up to 50% ethanol/water, up to 50% glycerol/water
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with complete operator’s manual and calibration instruction sheet.
Ordering Example: (1) FC72 Flow cell = $275
|
|
|
|
|
| |
|
Keywords:Chlorine Dioxide and Free Chlorine Sensors
|
Back to top |
|
|
