1/16 DIN Temperature/Process Autotune Multi Ramp and Soak Controllers with Optional Plug-in Communications and CN9-SW-GRAFIX Cloning, Logging & Charting Software |
| CN9600 Series
|
|
 |
|
|
|
|
|
|
| • |
Display Engineering Units °C, °F, BAR, PSI, pH, rH, SET (Universal Unit)
|
| • |
5 Alarm Configurations
|
| • |
PID Heat-Cool Control
|
| • |
NEMA-4 (IP66) Faceplate
|
| • |
Multi Ramp and Soak: 31 Programs, 126 Segments
|
| • |
Assured Soak
|
| • |
mA or V Linear Inputs
|
| • |
mA or V Linear Outputs
|
| • |
Three Outputs Standard
|
| • |
Analog Retransmission
|
| • |
Factory or Field Installable RS-232 or RS-485 (MODBUS Protocol) Communications
|
| • |
CN9-SW-GRAFIX Charting & Remote Control Software
|
|
View related products - Controllers, Meters and Switching Devices
|
|
|
|
|
The new 1 /16 DIN CN9600 Dual Display controllers follow the OMEGA tradition of innovative design. The new CN9600 offers powerful Process Control and Programmer capabilities. Building on the success of the CN132 and CN9000A series, the new models include several new features, the most important being the option of a low cost serial communicating system with easy to use Windows- based software. The CN9-SW series software bridges the gap between the “stand alone” system and full SCADA of Fieldbus control networks by providing a facility for remote supervision of up to 128 instruments using MODBUS protocol. It requires only a modest investment and can be operated by anyone with a medium specification PC or laptop that can be run with Windows 95, 98 or Windows NT..
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for other available models.
For complete product specifications see the Related Links section at the bottom of this page.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) CN96111TR Dual Display with Standard Thermocouple or RTD Input and 3 Mechanical Relay Outputs = $235
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Output Type
|
| |
Select
111 for 3 Mechanical Relays
211 for 1 DC Pulse and 2 Mechanical Relays
221 for 2 DC Pulse and 1 Mechanical Relay
411 for One 4 to 20 Milliamps and 2 Mechanical Relays
421 for One 4 to 20 Milliamps 1 DC Pulse and 1 Mechanical Relay
511 for 1 Analog 5 Volt Output and 2 Mechanical Relays
521 for 1 Analog 5 Volt Output 1 DC Pulse and 1 Mechanical Relay
611 for 1 Analog 10 Volt Output 2 Mechanical Relays
621 for 1 Analog 10 Volt Output 1 DC Pulse and 1 Mechanical Relay
|
(2)
|
Input Type
|
| |
Select
TR for Standard Thermocouple or RTD
MA for 4 to 20 Milliamp
5V for 5 Volt Analog
10V for 10 Volt Analog
|
(3)
|
Communication Option
|
| |
Select
Nothing(leave field blank) for No Option
-C2 for RS-232 Communications
-C4 for RS-485 Communications
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
 |
|
|
| |
|
Keywords:1/16 DIN Temperature/Process Autotune Multi Ramp and Soak Controllers with Optional Plug-in Communications and CN9-SW-GRAFIX Cloning, Logging & Charting Software
|
Back to top |
|
|
