The CNI-CB120SB Series is a self-contained temperature/process control panel that provides a complete control system design, eliminating the need to select, collect and assemble separate components. The preconfigured panels are ready to install, requiring only supply power, load and sensor hook-up. They are equipped with an OMEGA® iSeries microprocessor-based controller with on/off, PID and ramp/soak capabilities along with a tri-color display. These control panels are supplied with a thermocouple input jack and M12 female connector for RTD or process inputs. Their compact packaging makes them portable or easy to mount, even in limited spaces.
For additional information on the CNI microprocessor-based controller, see "related links" above.
Specifications Weight: 4.53 kg (10 lb) Dimensions: 203 H x 152 W x 152 mm D (8 x 6 x 6") Operating Temperature: 0 to 55°C (32 to 151°F)
Other thermocouple types are available. Please see the Part Number Builder directly below the ordering table.
† All amounts shown in USD Note: Comes complete with CNi16D33 controller ($245 value), one 1 A control fuse, one 15 A output fuse and two 5 A and 10 A fuses. Ordering Example: (1) CNI-CB120SB-K Temperature control panel, 120Vac 1440 watts, with "K" calibration connector kacj and female M12 RTD input connector , $600.00
Part Number Builder
Build Your Part Number Below
Thermocouple Type select from: K for K thermocouple J for J thermocouple T for T thermocouple E for E thermocouple N for N thermocouple R for R thermocouple S for S thermocouple
Ethernet Option select from: Nothing(leave field blank) for No Ethernet -EI for Ethernet
Note: All combinations may not be valid, check spec sheet for valid part numbers.