Touch-Safe Small Heater 10 W, 20 W |
| CSK060 Series |
|
 |
|
|
|
 |
These heaters are used in enclosures where
condensation is to be prevented or the
temperature may not fall below a minimum
value. In this way corrosion is avoided and
an even temperature is ensured. The heaters
are designed for permanent operation.
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac/Vdc* (min 110V, max 265V)
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <85°C (185°F), (according to VDE 0100), except upper protective grille
Connection: 2-pole terminal 2.5 mm2 (0.1"), torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Dimensions: 98 x 38 x 75 mm (3.9 x 1.5 x 3.0")
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position:
Vertical Operating/Storage Temperature: -45 to 70°C (-49 to 158°F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE + UL File No. E150057 (according to UL499 in combination with UL508A)
Note: Other voltages on request
* Operating with voltages below
140 Vac/Vdc reduces heating
performance by approximately 10%.
|
| |
 |
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Note: Comes with operator’s manual.
|
|
 |
|
 |
|  |
|
Keywords:Touch-Safe Small Heater 10 W, 20 W, Enclosure Heater, stego, enclosure heater, compartment heater, heater, screw plug immersion heaters
|
Back to top
|
|