 |
The Model CSMSTRV2 is a communications and control platform
designed for use with Modular Controller Series slave modules. The
CSMSTRV2 uses a proprietary high speed serial protocol to
communicate, via backplane connection, with up to 16 slave
modules. Through the same connection, the Master also provides
power to the modules. When powered up, the CSMSTRV2
automatically identifies and addresses connected slave modules. By
storing the configuration information of all of the modules, the
CSMSTRV2 is able to automatically configure modules if they
are replaced.
The Master provides high-speed RS232/422/485 communication
ports and an Ethernet port for connection to PCs, PLCs, and SCADA
systems. An extensive list of master and slave protocol drivers are
available to allow the CSMSTRV2 to share and exchange variable
data with external devices. The 10 Base-T/100 Base-TX Ethernet
port can also be used to connect and share data with other devices
at high speeds.
The CSMSTRV2 was designed as a direct replacement for the
original CSMSTRSE. This new model provides benefits such as
support via Crimson 2.0 software, which allows configuration files
to be uploaded. To save programming time, files originally created
in Crimson 1.0 (.cdb files) may be imported into Crimson 2.0.
The design of the Modular Controller Series high density packaging
and DIN rail mounting saves time and panel space. The controller
snaps easily onto standard top hat (T) profile DIN rail.
The CSMSTRV2 is programmed with Crimson 2.0 software for
Windows® 2000 or later platforms. The software is an easy to use,
graphical interface which provides a means of communication
configuration, as well as commissioning and calibration of
new systems.
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Note: Controllers come with termination plug, terminal power block, and complete operator's manual.
Ordering Example: (1) CSMSTRV2 Controller, (1) SFCRM2MC Software, (1) G3CF512M G3CF512M, 512 MB 512MB flash card, (1) CSDIO14R 8 inputs 6 relay output module, (1) PSDR0100 Power supply = $1114
|
|
 |
|
 |
|  |
|
Keywords:Modular Controller Series Master
|
Back to top |
|
|