 |
Model CSPID / CSPID2 Single and Dual Loop PID Control Modules
- Performs Heat (Reverse),
Cool (Direct), or Heat/Cool
(Reverse/Direct)
- Universal Inputs Accept B, C, E,
J, K, R, N, S, and T Type
Thermocouples, 100 Ω 385/392
and 120 Ω 672 Type RTDs
0 to 10V and 0/4 to 20mA Signals
- Hot-Swappable Replacement
Reduces Downtime
- Auto Addressing Minimizes
Configuration Time
- Fully Isolated Design Provides
Reliable Operation
- PID Control with Reduced Overshoot
- On Demand Auto-Tuning of
PID Settings
- Discrete Outputs Available in
Relay, Triac, or SSR
- DC Analog Output
(Optional, CSPID1 Only)
- Heater Current Input (Optional)
Ensures Detection of Heater
Circuit Failure
Model CSTC8 / CSRTD6 Dedicated High-Density Temperature Input Modules
- Models Available for
Thermocouple or RTD Inputs
- Unused inputs can be disabled to
increase overall reading rate
- Programmable slope and offset
correction to remove sensor error
- Ideal for Data-Acquisition
Applications
- Auto Addressing Minimizes
Configuration Time
- Can be Used in Conjunction
With Any CS Series Modules
Model CSINI8/CSINV8/CSINI8L/CSINV8L Dedicated High-Density Analog Input Modules
- Accept up to Eight ±10V or
0/4 to 20 mA Inputs per Module
- "L" Series Modules Offer
100 Linearization Points per Input
- Unused Inputs Can be Disabled
to Increase Overall Reading Rate
- Ideal for Data-Acquisition
Applications
- Auto Addressing Minimizes
Configuration Time
- Can be Used in Conjunction
With any CS Series Modules
Model CSDIO14 Digital I/O Module with Logic Engine
- 8 Input / 6 Output Digital Module
- Inputs Isolated From Outputs
- Inputs Independently Switch
Selectable for Sink or Source
Signals
- Inputs Independently
Configurable for High or Low
Active State
- Inputs Independently Switch
Selectable for High or Low
Frequency Signals
- Relay or NFET Output Models
Available
- Can be Used in Conjunction
With any CS Series Modules
Model CSSG Strain Gage PID Control Module
- Performs Reverse, Direct,
or Reverse/Direct Control
- Input Accepts 20mV, 33mV,
or 200mV Strain Gage Signals
- Secondary Input for Calculation
of Difference, Sum, Average, etc.
- Selectable 5 or 10V Excitation
- Three Alarm Outputs per Module
- Fully Isolated Design Provides
Reliable Operation
- PID Control With Reduced
Overshoot
- On Demand Auto-Tuning of PID
Settings
- Discrete Outputs Available in
Relay or SSR
- DC Analog Output Optional
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Note: Comes with complete operator's manual.
Ordering Example: (1) CSDIO14R 8 inputs 6 relay output module = $247
|
|
 |
|
 |
|  |
|
Back to top |
|
|