Omegamation 1-888-55-OMEGA | 1-888-55-66342

Part Number All Omega

Angular Pneumatic Grippers 180° Series DIRECTCONNECT™ with Spring Assist

DCT-RE Series

DCT-RE Series:Angular Pneumatic Grippers 180° Series DIRECTCONNECT™ with Spring Assist

Click here for larger image.

^$ 507.00 DCT-12M-RE

•	Highly Configurable Modular Construction, Exclusive DIRECTCONNECT™ Technology
•	Full Jaw Opening (180°) Allows Part to be Direct Fed into Gripper, Eliminating One Additional Motion
•	Fail Safe Operation-Internal Spring to Maintain Gripper Force if Gripper Looses Air Pressure
•	Compact Design for Use in Confined Spaces
•	Shielding to Repel Chips for Use in Harsh Environments
•	Repeatability ±0.05 mm (0.002") and Accuracy of ±0.07 mm (0.0028")
•	Up to 5 Million Cycles in Typical Applications and 10 Million with Maintenance
•	Temperature Rating from -35 to 80°C (-30 to 180°F)
•	System Requires 4 to 7 bar (60 to 100 psi) Dry Filtered (40 Microns or Better) Air Supply
•	Accessory Equipment Required – 4-Way 2-Position Pneumatic Control Valve

View related products - Motion

DCT-RE Grippers can be mounted to other DIRECTCONNECT™ products without additional fixtures, see Related Products above

PNEUMATIC SPECIFICATIONS IMPERIAL METRIC
Pressure Operating Range: 4 to 7 bar(60 to 100 psi)
Cylinder Type: Double acting
Dynamic Seals: Internally lubricated Buna-N
Valve Required to Operate: 4-way, 2-position
AIR QUALITY REQUIREMENTS
Air Filtration: 40 Micron or better
Air Lubrication: Not necessary*
Air Humidity: Low moisture content (dry)
TEMPERATURE OPERATING RANGE
Buna-N Seals (Standard): -35 to 80°C (-30 to 180°F)
FKM Seals (Optional): -30 to 150°C (-20 to 300°F)
MAINTENANCE SPECIFICATIONS
Expected Life Normal Application: 5 million cycles w/preventative maintenance 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
* Addition of lubrication will greatly increase service life.

SPECIFICATIONS DCT-12M-RE
Total Rated Grip Force, F @ 7 bar (100 psi) L = 25 mm (1") @ 0°: 40 N (9 lb)
Stroke: 90° of stroke for each finger
Weight: 0.12 Kg (0.26 lb)
Pressure Range: 4 to 7 bar (60 to 100 psi)
Cylinder Bore Ø: 12 mm (0.472")
Displacement: 1.92 cm3 (0.117 in3)
TEMPERATURE RANGE
Standard Seals: -35 to 80°C (-30 to 180°F)
FKM Seals: -30 to 150°C (-20 to 300°F)
Actuation Open/Close: 0.08/0.05 sec
Accuracy: ±0.07 mm (±0.0028")
Repeatability: ±0.05 mm (±0.002")
Valve Required to Actuate Single Acting: 3-way, 2-position
Valve Required to Actuate Double Acting: 4-way, 2-position

SPECIFICATIONS DCT-16M-RE
Total Rated Grip Force, F @ 7 bar (100 psi) L = 25 mm (1") @ 0°: 87 N (19 lb)
Stroke: 90° of stroke for each finger
Weight: 0.20 Kg (0.44 lb)
Pressure Range: 4 to 7 bar (60 to 100 psi)
Cylinder Bore Ø: 16 mm (0.630")
Displacement: 4.12 cm3 (0.251 in3)
TEMPERATURE RANGE
Standard Seals: -35 to 80°C (-30 to 180°F)
FKM Seals: -30 to 150°C (-20 to 300°F)
Actuation Open/Close: 0.15/0.12 sec
Accuracy: ±0.07 mm (±0.0028")
Repeatability: ±0.05 mm (±0.002")
Valve Required to Actuate Single Acting: 3-way, 2-position
Valve Required to Actuate Double Acting: 4-way, 2-position

SPECIFICATIONS DCT-20M-RE
Total Rated Grip Force, F @ 7 bar (100 psi) L = 25 mm (1") @ 0°: 141 N (32 lb)
Stroke: 90° of stroke for each finger
Weight: 0.33 Kg (0.73 lb)
Pressure Range: 4 to 7 bar (60 to 100 psi)
Cylinder Bore Ø: 20 mm (0.787")
Displacement: 7.92 cm3 (0.483 in3)
TEMPERATURE RANGE
Standard Seals: -35 to 80°C (-30 to 180°F)
FKM Seals: -30 to 150°C (-20 to 300°F)
Actuation Open/Close: 0.20/0.14 sec
Accuracy: ±0.08 mm (±0.003")
Repeatability: ±0.05 mm (±0.002")
Valve Required to Actuate Single Acting: 3-way, 2-position
Valve Required to Actuate Double Acting: 4-way, 2-position

To Order (Specify Model Number)

Part Number	Availability	Price	Description	Qty.

DCT-12M-RE		$507.00	180° Series angular gripper with spring assist, 18 mm (0.71") jaw opening	Qty
DCT-16M-RE		$556.00	180° Series angular gripper with spring assist, 20 mm (0.79") jaw opening	Qty
DCT-20M-RE		$631.00	180° Series angular gripper with spring assist, 22 mm (0.87") jaw opening	Qty

Accessories

OISP-014		$114.00	4 mm PNP inductive sensor with quick disconnect, 1 or 2 required	Qty
OISN-014		$114.00	4 mm NPN Inductive sensor with quick disconnect, 1 or 2 required	Qty
OHSP-017		$63.00	PNP magneto resistive sensor long barrel with quick disconnect, 1 or 2 required	Qty
OHSN-017		$63.00	NPN magneto resistive sensor long barrel with quick disconnect, 1 or 2 required	Qty
OHSP-011		$63.00	PNP magneto resistive sensor short 90° barrel with quick disconnect, 1 or 2 required	Qty
OHSN-011		$63.00	NPN magneto resistive sensor short 90° barrel with quick disconnect, 1 or 2 required	Qty
CABL-010		$23.00	Quick disconnect cable 2 m (6') in length, 1 or 2 required	Qty
CABL-013		$26.00	Quick disconnect cable 5 m (16') in length, 1 or 2 required	Qty
BR-CT-12		$31.00	Adjustment stop kit (1 stop and 1 shielded plate) for DCT-12M-RE, 1required	Qty
BR-CT-16		$31.00	Adjustment stop kit (1 stop and 1 shielded plate) for DCT-16M-RE, 1 required	Qty
BR-CT-20		$36.00	Adjustment stop kit (1 stop and 1 shielded plate) for DCT-20M-RE, 1 required	Qty
SD-CT-16		$46.00	Inductive sensor mounting kit for DCT-16M-RE, 1 or 2 required	Qty
SD-CT-20		$46.00	Inductive sensor mounting kit for DCT-20M-RE, 1 or 2 required	Qty

† All dollar amounts on this site are shown in US currency.

Note: Sensor and cable sold separately. Inductive sensor not available on DCT-12M-RE.
Ordering Example: (1) DCT-12M-RE 180° Series pneumatic angular gripper with spring assist,18 mm (0.71") jaw opening and gripper force of 40 N (9 lb) = $507

Related Links - Related Products

Related Products
DLM-07M, DLM-09M, DLM-12M:
DRF-075M, DRF-094M, DRF-106M, DRF-131M:
DRG Series:	Shaft Mount Rotary Actuator DIRECTCONNECT™
DLT Series:	Linear Thruster Slides - Pneumatic Internally Powered DIRECTCONNECT™ Modular Series

Keywords:Angular Pneumatic Grippers 180° Series Directconnect™ with Spring Assist