Linear Slides Can be Mounted and Operated in any Direction
•
Linear slides can be mounted and operated in any direction
•
Precision Linear Motion— 25 to 100 mm of Travel with 0.005 mm (0.0001") Accuracy
•
Repeatability 0.08 mm (0.003") with pre-installed Precision Stop
•
Up to 5 Million Cycles in Typical Application—Up to 10 Million with Maintenance
•
Temperature Operating Range -35 to 80ºC (-30 to 180ºF)
•
Double Acting Pneumatic Cylinder Requiring 1.4 to 7 bar (20 to 100 psi) Dry Filtered (40 micron or Better) Air Supply Along with a 4-Way, 2 Position Valve
DLM Linear Mini-Slides can be utilized in many industrial, R&D, lab, production and quality inspection applications from single direction to complex X-Y-Z motion. These components are used in typical Pick-N-Place applications and can handle small to medium size objects. Productivity improvements and cost reduction of repetitive task can be automated in some of the following applications: assembly; escapements; in-line directional changes; transfer of objects with precision movements. The modular design allows the addition of rotary actuators and grippers with out the need of adapter plates for additional savings through fast assembly and reduced machining time.
Retract Stroke Adjustment 5 mm adjustment.
Dowel Holes Standard Slip fit dowel holes in body and tool plate.
Multiple Air Port Locations 4 standard airport location (bottom, back, and both sides).
Recirculating Ball Bearings Rail Slide Preloaded for accuracy, built-in ball retention
Magneto Resistive Sensing Mounting slots and magnet are standard for up to eight sensors (sensors sold separately).
Thru-Body Mounting C'bored holes for socket head cap screw on both sides.
Precision Stops Delrin® internal stops are standard for increased repeatability.
Mounting Patterns Mounting on all six sides (standard)
Bearing Seals Bearing blocks are equipped with low friction seals.
Manifold Air Ports Bottom air ports are C’bored for O-ring manifold seals.
Precision Tool Plate Position Adjustment 5 mm adjustment.
Double Bearing (-D Option) Three longer stroke sizes available with two bearings as an option for greater moment capacity. (Consult sales)
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) DLM-07M-12-12-P mini pneumatic powered precision slide with maximum strok of 12 mm (0.50"), (2) OM-AIR-C0K510405 regulating out flow control valves for M5 thread and 4mm (or 5/32") tubing = $231.4
