Linear thruster slides can be mounted and operated in any direction
•
Precision Linear Motion - 5 to 150 mm (0.20 to 6") of Travel
•
Thruster Force 89 to 275 N (20 to 62 lb) at 5.5 bar (80 psi)
•
Repeatability 0.03 mm (0.001") with Precision Stop Option
•
Up to 5 Million Cycles in Typical Application - Up to 10 Million with Maintenance
•
Temperature Operating Range -35 to 80°C (-30 to 180°F)
•
Double Acting Pneumatic Cylinder Requiring 3 to 7 bar (40 to 100 psi) Dry Filtered (40 micron or Better) Air Supply Along with a 4-Way, 2 Position Valve
DLT Linear Thruster Slides can be utilized in many industrial, R&D, lab, production and quality inspection applications from single direction to complex X-Y-Z motion. These components are used in typical Pick-N-Place applications and can handle small to large objects. Productivity improvements and cost reduction of repetitive task can be automated in some of the following applications: assembly; escapements; in-line directional changes; transfer of objects with precision movements. The modular design allows the addition of rotary actuators and grippers with out the need of adapter plates for additional savings through fast assembly and reduced machining time.
TECHNICAL SPECIFICATIONS Pneumatic Specifications Pressure Operating Range*: 3 to 7 bar (40 to 100 psi)
Cylinder Type: Double acting
Dynamic Seals: Internally lubricated Buna-N
Valve Required to Operate: 4-way, 2-position
Air Quality Requirements Air Filtration: 40 micron or better
Air Lubrication: Not necessary
Air Humidity: Low moisture content (dry)
Temperature Operating Range Buna-N Seals (Standard): -35 to 80°C (-30 to 180°F)
FKM Seals (Optional): -30 to 150°C (-20 to 300°F)
Maintenance Specifications Expected Life: Normal Application: 5 million cycles
With Preventative Maintenance: 10+ million cycles**
Field Repairable: No
Seal Repair Kits Available: No
Application Restrictions: Flow controls, shock absorbers and
urethane bumpers recommended for nearly all applications. Use composite
bushing in dirty or gritty environments. Never use silicone based lubricants with composite bushings.
* Higher pressure possible. Consult Sales with application details.
** Addition of lubrication will greatly increase service life.
† All dollar amounts on this site are shown in US currency.
Note: * Requires universal mounting kit. † Sensor and cable sold separately.
