 |
The DP25-RMS Series digital panel meter features high accuracy, 4 digits, and ac and true-RMS scalable inputs. The 4 digit, 14- segment alphanumeric display ensures easy reading and reconfiguration. This meter uses an integrated circuit that computes the true root-mean-square value of complex input signals. ac voltage measurements with a frequency of up to 5 kHz can be measured.
The DP25-RMS has the capability to capture and display both peak and valley levels of input signals. A dual 6 amp relay is available and can be configured to provide on/off control. An isolated analog output is available, which can be configured for 4-20 mA or 0-10 Vdc. RS-232 and RS-485 communication capability is also available. The true RMS AC input makes this meter an ideal instrument for use in power monitoring, piezoelectric sensors, signal conditioning, and many other applications.
The To Order box reflects base models only. In order to configure a part number with options, use the part number builder below.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Individual ranges are dip switch selectable. The meter comes factory set at the highest range.
Ordering Example: (1) DP25-VRMS-AR is a High Accuracy True RMS Voltage Input Indicator with Dual 6 Amp Relays and an Analog Output Option. = $495
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Input Type
|
| |
Select
VRMS for Voltage
CRMS for Current
|
(2)
|
Options
|
| |
Select
Nothing(leave field blank) for No Option
-230 for 230 Volt AC Power
-230-ARS2 for 230 Volt AC Power with Analog Output Dual 6 Amp Mechanical Relays and RS232 Communications
-A for Analog Output
-A-S2 for Analog Output with RS232 Communications
-AR for Analog Output with Dual 6 Amp Mechanical Relays
-ARS2 for Analog Output with Dual 6 Amp Mechanical Relays and RS232 Communications
-R for Dual 6 Amp Mechanical Relays
-S2 for RS232 Communications
-S4 for RS485 Communications
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
|
|
|
 |
|
|
| |
|
Keywords:High Accuracy True-RMS Scalable Indicator for AC Sinusoidal and Non-Sinusoidal Signals
|
Back to top |
|
|
