Panel Meters/Controllers The unparalleled accuracy of the OMEGA® DP25 signal conditioner is available in an economical series of panel meters/controllers. The OMEGA® DP25 series of meter/controllers feature a four-digit, 14-segment display plus optional dual 6 amp SPDT relays (Single Pole Double Throw; Form C) and a choice of isolated or non-isolated analog output. The scalable 0-10 Vdc, 0-20 mA, or 4-20 mA analog output can be used for retransmission of the display value or as a proportional control output, as required. The microprocessor-based DP25 series includes instruments for process (dc voltage and current) strain gage, thermocouple, RTD, dual/differential thermocouple, dual/differential RTD, pH, orp, ac voltage and current.
† All dollar amounts on this site are shown in US currency. Note: Power Options are Not Field Installable
Part Number Builder
Build Your Part Number Below
Base Meter with 110 Vac Power select from: DP25-E for Process Meter DP25-S for Strain Input Meter DP25-TC for Thermocouple Meter DP25-RTD for RTD Meter DP25-TH for Thermistor Meter DP26-TC for Dual Differential Thermocouple Meter DP26-RTD for Dual Differential RTD Meter
Power Options select from: Nothing(leave field blank) for Standard Unit with 115 Vac -230 for 230 Vac -DC10/32 for 10 to 32 Vdc -DC26/56 for 26 to 56 Vdc
Output Options select from: Nothing(leave field blank) for Standard Unit without Outputs -A for Non-Isolated Analog Output -AI for Isolated Analog Output -R for Dual 6 A Relays -AR for Non-Isolated Analog Output with Dual 6 A Relays -AI-R for Isolated Analog Output with Dual 6 A Relays
Display Options select from: Nothing(leave field blank) for Standard with Red LED Display -GN for Green LED Display
Note: All combinations may not be valid, check spec sheet for valid part numbers.