Cart  |  Contact  |  Help  | 
US and Canada1-888-826-6342

Your Source for Process Measurement & Control


Rate/Total/Batch Meters | DPF400

Rate/Total/Batch Meters

$450.00 DPF401

  • bvseo_sdk, net_sdk,
  • CLOUD, getAggregateRating, 62ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
5 year warranty CE
  • 5 Year Warranty
  • Rate and Total Simultaneously
  • Batch Controller
  • Real-Time Clock
  • Square Root Option
  • Isolated BCD Option
  • 5 Open Collector Outputs Standard
  • Red or Green Display
Instrumentation for Pressure and Strain Measurements - View related products


The DPF400 Series is a complete line of flowrate indicators offering exceptional performance at an economical price. Individual models are available for flowrate and totalization (with or without square root extraction) batch control.

The DPF400 is front panel programmable to scale any input range to display in desired engineering units. Independent scale factors for rate and total allow rate indication and totalization in different units, such as GPM rate and total barrels. If the optional RS-232 or RS-485 communications are installed, the unit may also be programmed by remote computer.

The DPF400 is available with 4 input types, including TTL/open collector pulse, low level frequency, analog voltage or analog current. The unit can be user-configured for one of three functions:
  1. a ratemeter/totalizer/batcher
  2. a ratemeter/totalizer/batcher with square root extraction (for differential pressure flow measurement)
  3. a batch controller only with multibatch counting, auto/manual batch recycle, and remote or local STOP/CONTINUE control (START control can be obtained with a user supplied switch in series with the control relay)
Options to the DPF400 include analog and BCD outputs, alarm/control outputs, and RS-232 or RS-485 communications.

The RS-232 or RS-485 communications options are bi-directional, allowing the user to configure the DPF400 as well as read current values.

While each DPF400 comes standard with 5 open collector outputs, the optional DP40-R board provides dual 7A mechanical relays which replace two of the open collector alarms, for a total of two 7A relay and three open collector alarms.

TTL Level Inputs (DPF401): 0.7 to 2.0 V threshold; 0.2 Hz to 20 kHz frequency; 24 V protection, positive trigger slope; 16 to 30 V unregulated 75 mA sensor excitation
Isolated Pulse Input with Excitation(DPF402): 60 Vrms with protection to 240 V max signal
DPF4025 V13 mV30 mV
Low8.2 V22 mV50 mV
Level 2.4 V 35 mV 60 mV
NPN Open Collector Input (DPF402): 3-wire connection; 12 V regulated excitation
NAMUR Input (DPF402): 2-wire connection; 8.2 V excitation; 1 kohm impedance; <1 mA activated, >3 mA deactivated
Contact Closure Input (DPF402): 2-wire connection; 12 V regulated sensor excitation, 10 on/off per second frequency range
Analog Input (DPF403): 0 to 5 V, 1 to 5 V, or 4 to 20 mA range; 0 to 10 V, or 0 to 1 mA inputs optionally available; 354 Vp isolation; programmable low-level shutoff; 0.02% FS non-linearity; 0.05% FS accuracy; accuracy, 50 ppm/°C temperature coefficient, maximum
Display: 6-digit, 14-segment LED, red or green; 13.8 mm H (0.54"); indicator lights for alarms and status modes
Display Update: 0.04 to 3 seconds, programmable.
Min. Input Frequency: 0.2 Hz
Power: 115 std., 230 Vac opt. 50/60 Hz; 10 Watts maximum
Accuracy: Frequency: 0.01% of reading; Analog: 0.05% of full scale
Step Response: Analog: 50 msec for 10 to 90% FS; Frequency: equal to selected gate time
Operating Ambient Range: 0 to 50°C (32 to 122°F), 95% RH, non-condensing
Storage Temperature: -40 to 85°C (-40 to 185°F)
RS-232 Communications (optional): Front panel programmable for 300/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit all measured values, alarm status, actual measured input value (not scaled) and status on programmable intervals from 1 to 60,000 seconds.
RS-485 Communications (optional): 300/1200/2400/4800/9600/19.2k baud; RJ11 6-wire connection; addressable from 0 to 199
Open Collector Outputs: Five 150 mA @ 1 Vdc sink; 30 V open
BCD Output (optional): Isolated; 3- or 6-digit addressing; TTL level output; 5 Vdc external power supply required for isolated output
Mechanical Relays (optional): dual, form C; 7A at 230 Vac/30 Vdc
Analog Outputs (optional): 0 to 5 V/ 1 to 5 V/0 to 10 V/0 to 20 mA/4 to 20 mA all field selectable; all internally powered (sourcing); 600 ohms max. loop impedance for 20 mA outputs; min. 500 ohms input impedance for voltage outputs; 354 Vp isolation; 15-bit resolution; 0.1% of reading accuracy; 50 ms step response; fully adjustable zero and span adjustments.
Dimensions: 48 H x 96 W x 149 mm D (1.89 x 3.78 x 5.86")
Panel Cutout: 45 H x 92 mm W (1.772 x 3.622"); 18 DIN
Weight: 574 g (1.27 lb)
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.
DPF401 Star
2 In Stock
TTL/Open Collector/Contact Closure Input Meter Includes 16 V @ 70 mA Output Power
DPF402 Star
Available In 1 Bus. Day
Low Level Pulse Input Meter.Includes 12 V @ 70 mA output power or 8.2 V with 1 Kohm source impedance
DPF403 Star
Available In 1 Bus. Day
4-20 mA/0-5 Vdc/1-5 Vdc (field-selectable) Input Meter. Includes nominal 24 V @ 25 mA Output Power
DPF400-A3 Star
Available In 1 Bus. Day
Analog output board
DP40-B Star
Available In 1 Bus. Day
Isolated BCD output board
DP40-R Star
1 In Stock
Dual 7A mechanical relays
Click to expand/minimize a list of what others bought with theDP40-S24
Customers also bought
DP40-S24 Star
Available In 1 Bus. Day
Isolated RS232 communications
Click to expand/minimize a list of what others bought with theDP40-9SC2
Customers also bought
DP40-9SC2 Star
Available In 1 Bus. Day
9-pin Serial Connector for RS-232
DP40-25SC2 Star
Available In 1 Bus. Day
25-pin Serial Connector for RS-232
All amounts shown in USD
Note: DP40-B and DP40-R cannot both be installed in one unit.
Ordering Example: (1) DPF403-GR 4-20 mA/0-5 Vdc/1-5 Vdc (field-selectable) input meter with green display, $650.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:

(1) Model select from:
DPF401 for TTL/Open Collector/Contact Closure Input Meter
DPF402 for Low Level Pulse Input Meter
DPF403 for 4-20 mA/0-5 Vdc/1-5 Vdc (field-selectable) Input Meter
DPF400-A3 for Analog output board

(2) Power Options select from:
for 115 Vac leave blank
-230V for 230 Vac power

(3) Display Color select from:
for red display leave blank
-GR for green display

(4) Output Boards and Communications Options select from:
Nothing(leave field blank) for None
-B for Isolated BCD output board
-R for Dual 7A mechanical relays
Note: All combinations may not be valid, check spec sheet for valid part numbers.
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 2ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;