 |
The DPF5100 microprocessor-based, 6-digit, 1 /8 DIN panel instrument can be configured by front-panel keys or by a personal computer as a frequency meter/ tachometer, frequency-ratio meter, period/ period-average meter, time-interval/ time-interval-average meter, reset stopwatch, and cumulative timer or totalizer/1-stage batch controller. However, the DPF5100 display cannot toggle between rate and total. Two signal inputs can be used to provide frequency ratio or time-interval measurements.
Five Operating Modes
In the frequency meter, the minimum display update rate is equal to 1 period of the frequency input. Thus, very low frequency measurements are displayed and updated faster than most conventional frequency meters. Only two sensors are required to measure the rate of a moving object. The DPF5100 can be set up as frequency-ratio meter, ideal for monitoring flow ratios. The DPF5100 can be set up as an up or down totalizer/1-stage batch controller at rates up to 7 MHz. The display capacity is –99,999 to 999,999 counts with exponential format up to 9.99 E9. Upon ac power loss, the latest reading is automatically saved in non-volatile RAM and is restored upon return of power.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for more available models.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note:
*Options (-A, -BCD, and -R) are mutually exclusive.
Ordering Example: (1) DPF5100-A meter with analog output, $380 + 155 = $535
|
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Multi-Function Meter
|
| |
Select
DPF5100 for Meter for 2 TTL/CMOS Inputs
DPF5200 for Same as DPF5100 with Sensor Excitation for 1 channel
DPF5300 for Meter with Conditioner for One Low Level and one TTL/CMOS Input
DPF5400 for Meter with Conditioner for 2 Channels
DPF5500 for Meter for Analog mA and Voltage Inputs (1 channel)
|
(2)
|
Power & Display Options
|
| |
Select
Nothing(leave field blank) for Standard Unit
-A for Analog Output
-BCD for BCD Output
-R for 6A Dual Relays
-10/32VDC for 10 to 32 Vdc Power
-230AC for 230 Vac Power
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
|
|
|
 |
|
|
| |
|
Keywords:MultiFunction Meter for Batch Control, Rate Indication and Totalization
|
Back to top |
|
|
