The E26 stacklight unit is a modular system
that provides illuminated and audible status
indication in all directions. Easily assembled
plug-in modular units include constant,
flashing and strobe light units, as well as
bi-tonal alarm systems. Stacklights may be
assembled in a variety of configurations.
Numerous lamp, color and mounting options
further enhance the stacklight’s versatility.
ASSEMBLING
A STACKLIGHT SYSTEM
1) Select a Base Unit
Two base units are available, the
standard base unit or a flashing base.
2) Select an Extension Tube
Models are available in lengths from
1 inch to 14 inches as well as with
angle design.
3) Select an Optional Mounting
The standard 4 hole mounting plate
attaches to the bottom of the bottom
the extension tube to provide an
and secure means of mounting the
stack light.
4) Select up to Six Light Modules
Light modules are available in a variety
of colors with either incandescent
LED light sources. The incandescent
lights are lower cost and brighter
the LEDs, however, the LEDs have
greater bulb life.
5) Optional Alarm Module
The bi-tonal alarm module mounts
the top of the stack. When used
5 light modules may be used.
BASE UNITS
STANDARD STACKLIGHT BASE
For use with incandescent or standard
LED for steady, non-flashing
illumination or with flashing LEDs for
flashing illumination. Bases include
terminal block for wiring, stacklight
cover and gasket.
FLASHING STACKLIGHT BASE
Allows configuration of each light in the
stack for either steady or 60 times per
minute flashing illumination. Flashing
circuit for use with incandescent
lamps only.
LIGHT MODULES
Available in a variety of colors for both incandescent lamps and LED lamps. To maximize illumination
and light dispersion, incandescent units include an opal white diffuser while LED diffusers are clear.
ALARM MODULE
May be fitted to the top of a complete stacklight unit or
directly to the stacklight bases, if desired. Also features
adjustable sound levels.
† All dollar amounts on this site are shown in US currency.
