Screw Plug Immersion Heaters for Solution Water Applications |
| EMTI-3 Series |
|
 |
|
|
|
|
|
$
650.00
EMTI-330/240
|
| • |
2 NPT Stainless Steel Screw Plug
|
| • |
Incoloy Sheath Elements
|
| • |
High Watt Density (45 W/in2)
|
| • |
3 to 18 kW
|
| • |
Without Thermostat
|
| • |
240 and 480 Volt, Three Phase
|
| • |
General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure
|
View related products - Immersion Heaters
|
| |
|
|
|
 |
SPECIFICATIONS
Wattage: 3 to 18 kW
Power: 240 to 480 V, 3 phase
Watt Density: 45 W/in2
Screw Plug: 2 NPT stainless steel
Enclosures: E1 general purpose, NEMA 1
(IP00) rated, or type E2 moistureresistant/
explosion-resistant enclosure.2
| kW |
Volts |
W/in2 |
No. Htg.
Elem. |
E1 General Purpose Enclosure1 |
E2 Moisture Resis/Explosion Resis.2 |
Dim. B
cm (in) |
Model No. |
Wt.kg (lb) |
Model No. |
Wt.kg (lb) |
| 3 | 240 | 45 | 3 | 19.7 (7 3/4) | EMTI-330/* | 2.3 (5) | EMTI-330E2/* | 3.6 (8) |
| 3 | 480 | 45 | 3 | 19.7 (7 3/4) | EMTI-330/* | 2.3 (5) | EMTI-330E2/* | 3.6 (8) |
| 6 | 240 | 45 | 3 | 45 (17 3/4) | EMTI-360/* | 2.7 (6) | EMTI-360E2/* | 4.0 (9) |
| 6 | 480 | 45 | 3 | 45 (17 3/4) | EMTI-360/* | 2.7 (6) | EMTI-360E2/* | 4.0 (9) |
| 9 | 240 | 45 | 3 | 63 (24 7/8) | EMTI-390/* | 3.2 (7) | EMTI-390E2/* | 4.5 (10) |
| 9 | 480 | 45 | 3 | 63 (24 7/8) | EMTI-390/* | 3.2 (7) | EMTI-390E2/* | 4.5 (10) |
| 12 | 240 | 45 | 3 | 82 (32 7/16) | EMTI-3120/* | 4.0 (9) | EMTI-3120E2/* | 5.4 (12) |
| 12 | 480 | 45 | 3 | 82 (32 7/16) | EMTI-3120/* | 4.0 (9) | EMTI-3120E2/* | 5.4 (12) |
| 15 | 240 | 45 | 3 | 103 (40 3/8) | EMTI-3150/* | 4.5 (10) | EMTI-3150E2/* | 6.0 (13) |
| 15 | 480 | 45 | 3 | 103 (40 3/8) | EMTI-3150/* | 4.5 (10) | EMTI-3150E2/* | 6.0 (13) |
| 18 | 240 | 45 | 3 | 122 (47 7/8) | EMTI-3180/* | 5.4 (12) | EMTI-3180E2/* | 6.8 (15) |
| 18 | 480 | 45 | 3 | 122 (47 7/8) | EMTI-3180/* | 5.4 (12) | EMTI-3180E2/* | 6.8 (15) |
* Designate voltage, i.e., “240” for 240 Vac or “480” for 480 Vac.
1 Heaters with general purpose enclosures are UL listed and CSA certified.
2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) EMTI-330/480 3 kW heater powered by 480 Vac, $650.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Watts
|
| |
Select
30 for 3 kW
60 for 6 kW
90 for 9 kW
120 for 12 kW
150 for 15 kW
180 for 18 kW
|
(2)
|
Enclosure
|
| |
Select
Nothing(leave field blank) for General Purpose Enclosure
E2 for Moisture Resistant/Explosion Resistant
|
(3)
|
Volts
|
| |
Select
240 for 240 Vac
480 for 480 Vac
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
|
|
|
|
|
Keywords:Immersion Heaters
|
Back to top
|
