The FL9000-AC Series flowmeters are ideal for a wide range of flow monitoring applications.
These low cost flow meters will install in any position easily. Additional features include an
adjustable flow alarm externally mounted on the flow meter. The flow alarm will automatically
open or close AC electrical circuits, activating warning lights, bells, pumps or other process
control equipment.
SPECIFICATIONS Wetted Parts: T300 series stainless steel spring, strontium ferrite magnet, Buna O-rings
(for units with brass end fittings) Maximum Pressure: 22.4 bar (325 psig) Maximum Temperature: 121°C (250°F); relay rated to 70°C (158°F) Maximum Particle Size: 74 microns Alarm Relay: Latching relay circuit housed in a sealed polypropylene enclosure. Relay pulls in over 25% of
span and drops out above and below that. Includes mating connector. Relay is field replaceable; rated 1 A @
30 Vdc (-DC models), 0.5 @ 125 Vac (-AC models), resistive load Setpoint: Adjustable 0 to 100%FS Hex Fittings: 38.1 mm (1.5") flats
Media (Piston Type)
Flow Range (GPM)
Model Number 3/4" and 1" Nominal Brass Sweat Fitting*